Front Mount Trailer Hitch that Leaves Tow Hooks on a 2001 Chevy Silverado 1500 LT 4x4 z71

Question

Question:

Which hitch works, and do the toe hooks stay

asked by: Rick F

0

Expert Reply:

For a 2001 Chevy Silverado 1500HD model, when installing front mount hitch # 65028, the factory tow hooks do not need to be removed. I have included a link to the installation isntructions for you to view.

If you have a 1500LD model, the only front hitch is the Curt # 31302 and this hitch requires that you remove the factory tow hooks. I have linked instructions for this hitch for you.

expert reply by: Michael H

0

Answer 1

Since you do not want to drill the frame of your 2000 GMC Sierra 1500, you will want to go with the Curt trailer hitch #31302. The benefit of this hitch is that you can install it with the receiver below the front fascia or to exit out higher which…

view full answer...

Answer 2

Both the Curt Front Mount Trailer Hitch item #31108 and the Draw-Tite item #65028 are confirmed to fit the 2006 Chevy Silverado 2500's. I took a look at the installation instructions and capacities and they are as close to identical as you can…

view full answer...

Answer 3

We have not yet had the opportunity to install the Draw-Tite front mount hitch, #65028, on a vehicle so I do not have pictures I can show you. We do have the instructions and I have included a link to them for you to view. The top of the receiver…

view full answer...

Answer 4

When it comes to installing the Draw-Tite Front Mount Trailer Hitch Receiver, #65028, on 2004 Chevrolet Silverado 2500 HD without the tow hooks, you will just use different hardware, which is included. I have attached a snapshot of the instructions…

view full answer...

Answer 5

Unfortunately, the frame with isn't the only consideration. According to Draw-Tite, the differences in the way the front bumper, fascia and grill are situated in regard to the front of the frame members on a 2007 Classic versus a 2007 New Body…

view full answer...

Answer 6

We offer two front-mount hitches for your 2002 Chevy Silverado 2500HD and both can be seen on the link at right. The installation instructions for both, which are also linked, indicate that in the case of both the Curt hitch #31108 and the Draw-Tite…

view full answer...

Answer 7

If your 2000 Chevy is a C/K series then you will want to use part #31042 for Curt or part #65005 for Draw-Tite but if your truck is the Silverado version then you will want to use part #31108 for Curt or part #65028 for Draw-Tite. All of the above…

view full answer...

Answer 8

There are several front mount hitches available that will fit your 2006 Chevy Silverado. If you have a 1500 LD you would want a part #31302 If you have a 1500 HD you would want a part #65028 If you have a 2500 or 3500 you would also want a #65028 The…

view full answer...

Answer 9

The Draw Tite hitch part #65028 is a confirmed fit for your 2001 Chevy Silverado 1500HD. The tow hooks will need to be removed.

view full answer...

Answer 10

The tow hooks can stay. The hardware that is used to hold the tow hooks in place will be replaced by the hardware that comes with the front mount hitch. I have included a link to the instructions for you to reference.

view full answer...

Answer 11

All of the front mount hitches for the 2003 Chevrolet Silverado may require trimming of the black plastic fascia, that is mounted under the front bumper of your truck, depending on how the front bumper is mounted to the frame on each individual…

view full answer...

Answer 12

Yes, the installation on your 1999 GMC Sierra 2500 SLE of the Draw-Tite Front Mount Trailer Hitch Receiver #65028 will require permanent removal of your front tow hooks. The complete written installation instructions are linked for you at right. You…

view full answer...

Front Mount Trailer Hitch that Leaves Tow Hooks on a 2001 Chevy Silverado 1500 LT 4x4 z71

Products Featured in This Question

Continue Researching