Front Mount Hitch Recommendations for a 2006 Chevy Silverado

Question

Question:

They look the same, but cant tell if they are dimensionally similar. Even if I had to trim the fascia a little more it would be fine, just want to know if it will mount to the frame.

asked by: Ryan

0

Expert Reply:

There are several front mount hitches available that will fit your 2006 Chevy Silverado.

If you have a 1500 LD you would want a part # 31302
If you have a 1500 HD you would want a part # 65028
If you have a 2500 or 3500 you would also want a # 65028

The Curt Front Mount Hitch # 31109 that your referenced is designed to fit newer model Silverados and would not be recommended for you.

expert reply by: Jameson C

0

Answer 1

We offer two front-mount hitches for your 2002 Chevy Silverado 2500HD and both can be seen on the link at right. The installation instructions for both, which are also linked, indicate that in the case of both the Curt hitch #31108 and the Draw-Tite…

view full answer...

Answer 2

The tow hooks can stay. The hardware that is used to hold the tow hooks in place will be replaced by the hardware that comes with the front mount hitch. I have included a link to the instructions for you to reference.

view full answer...

Answer 3

For a 2001 Chevy Silverado 1500HD model, when installing front mount hitch #65028, the factory tow hooks do not need to be removed. I have included a link to the installation isntructions for you to view. If you have a 1500LD model, the only front…

view full answer...

Answer 4

All of the front mount hitches for the 2003 Chevrolet Silverado may require trimming of the black plastic fascia, that is mounted under the front bumper of your truck, depending on how the front bumper is mounted to the frame on each individual…

view full answer...

Answer 5

The Curt #31108 and Draw-Tite #65028 are very similar and will even install the same on your 2004 Chevrolet Silverado 2500. They also have the same weight capacity ratings of 500lbs tongue weight, 5,000lbs trailer weight and 9,000LB line pull. The…

view full answer...

Answer 6

For your 2004 Chevy Silverado 3500HD the Draw Tite hitch part #65028 is a confirmed fit. We checked with Draw Tite to confirm this. I also attached a picture of the hitch installed on a vehicle that has the factory skid plate you referenced.

view full answer...

Answer 7

We have not yet had the opportunity to install the Draw-Tite front mount hitch, #65028, on a vehicle so I do not have pictures I can show you. We do have the instructions and I have included a link to them for you to view. The top of the receiver…

view full answer...

Answer 8

Both the Curt Front Mount Trailer Hitch item #31108 and the Draw-Tite item #65028 are confirmed to fit the 2006 Chevy Silverado 2500's. I took a look at the installation instructions and capacities and they are as close to identical as you can…

view full answer...

Answer 9

For your 2004 Chevrolet 1500 HD you want front hitch #65028.

view full answer...

Answer 10

When it comes to installing the Draw-Tite Front Mount Trailer Hitch Receiver, #65028, on 2004 Chevrolet Silverado 2500 HD without the tow hooks, you will just use different hardware, which is included. I have attached a snapshot of the instructions…

view full answer...

Answer 11

The Draw Tite hitch part #65028 is a confirmed fit for your 2001 Chevy Silverado 1500HD. The tow hooks will need to be removed.

view full answer...

Answer 12

I spoke with my contacts at Curt and Draw-Tite regarding the front mounted trailer hitches you referenced, Curt #31108 and Draw Tite #65028 which are confirmed fits for your 2005 Chevy 2500HD. They both said that you will be able to retain the tow…

view full answer...

Front Mount Hitch Recommendations for a 2006 Chevy Silverado

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching