Front Mounted Receiver Hitch for 2007 Sierra Classic  

The only real difference between the Curt #31108 and Draw-Tite #65028 front hitches for your 2004 Chevy Silverado 2500 is that we've found the Curt hitches to traditionally have a little thicker of a powder coat which means they are a little…

We offer two front-mount hitches for your 2002 Chevy Silverado 2500HD and both can be seen on the link at right. The installation instructions for both, which are also linked, indicate that in the case of both the Curt hitch #31108 and the Draw-Tite…

The tow hooks can stay. The hardware that is used to hold the tow hooks in place will be replaced by the hardware that comes with the front mount hitch. I have included a link to the instructions for you to reference.

For your 2004 Chevy Silverado 3500HD the Draw Tite hitch part #65028 is a confirmed fit. We checked with Draw Tite to confirm this. I also attached a picture of the hitch installed on a vehicle that has the factory skid plate you referenced.

Due to the design of the front of your 2005 Chevy Silverado 3500 the only place you'll be able to have a front hitch opening is below the front fascia like where the Curt #31108 installs. This would be best option we have, but if you really…

The 2007 Chevy Silverado Classic 2500 requires a different front mount trailer hitch. From Curt, you can use #31108. I spoke with my contact at Curt and from the bottom of the frame rail to the bottom of the receiver on the hitch once installed is 5…

The Draw-Tite front mount hitch #65028 and the Curt Front Hitch #31108 are very similar, but they are not the same hitch. This was not intentional, the manufacturers just so happened to come up with very similar designs for the hitch coincidentally.…

The Curt #31108 and Draw-Tite #65028 are very similar and will even install the same on your 2004 Chevrolet Silverado 2500. They also have the same weight capacity ratings of 500lbs tongue weight, 5,000lbs trailer weight and 9,000LB line pull. The…

The Draw-Tite Front Mount Hitch #65050 will definitely fit your 2009 Chevy Silverado 2500HD. Though there is no drilling required for the install, you will need trim the fascia and if a front mounted license plate is present, you will need to add the…

We have Front Mount Trailer Hitch Receivers from Draw-Tite #65050, and from Curt #31109 that both have a max vertical weight limit of 500 lbs. This is max rating I have been able identify from our suppliers. I do not find a custom bolt on front mount…

All of the front mount hitches for the 2003 Chevrolet Silverado may require trimming of the black plastic fascia, that is mounted under the front bumper of your truck, depending on how the front bumper is mounted to the frame on each individual…

Both the Curt Front Mount Trailer Hitch item #31108 and the Draw-Tite item #65028 are confirmed to fit the 2006 Chevy Silverado 2500's. I took a look at the installation instructions and capacities and they are as close to identical as you can…