To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Just got it today. Looking forward to putting it on.
Fit perfectly, all hardware was correct, and instructions were simple. Ordered on Monday morning and had it in Southern Minnesota on Wednesday. Awesome! Great customer service!
Great product. Also great company. I ordered the hitch and I recieved a response from e-trailer right away. They did a great job on packing it and it was delivered sooner than I expected. I will continue to do business with this company. They treat you like you a long time customer the first purchase.
Product arrived on schedule. Instructions easy to follow. The inner frame bolts were difficulty to access once the receiver was in place. Overall, a relatively easy job to install. We are using the receiver to attach a bike carrier to the front of my truck as we haul a 5th wheel and cannot use the rear receiver when towing.
Easy install. Less than 15 minutes. 2003 GMC 2500 HD crew cab with 2 tow hooks. Removed old bolts then with hitch across my legs, legs extended under the truck was able to lift in place an bolt up using new longer bolts that came with kit. I did not need to trim fascia.
getting the washers in place between the frame and the hitch was a bit tricky, but we made it !
I emailed with an installation issue and was surprised by a nearly immediate phone call resolving the problem.
I had been waiting to find this Curt hitch on sale for a while.
First off I get to keep the hooks that came with my 2004 Silverado Crew cab 2500HD 4x4.
Then I removed two existing bolts and loosened a third on each hook.
Using a floor jack lifted the hitch into place and threaded in the new bolts through the frame and into the hooks.
The biggest problem I had was being able to reach the bolts into the side of the frame and hooks w/out removing the air dam.
Looks GREAT!!
I know some reviews have mentioned a reduction in ground clearance but my truck is not lifted and the clearance is nearly the same as the transmission skid plate installed by the factory.
I sometimes need to get low hard to see trailers into tight spaces and I’m also looking to pick up a winch. Looking forward to many years of hard work.
John
3/31/2021
This has made getting trailers parked closely and out of the way at job sites so much easier. Whish I hed it years ago!
Unbelievable how clean the install is for this product!! I was certain I would have to do some cutting or drilling, however not a single cut or new hole required. The product fit like it was straight from the factory ... even with the existing front Grille Guard that I have on my truck!!
I also appreciate the FAST shipping and customer service, as tracking info was emailed after the product shipped without requesting this info and the product arrived within the same week.
I've already recommended etrailer to other landscapers on lawnsite.com, as we're always looking for front-mount solutions for spreaders and other landscape equipment.
Dale M.
1/28/2015
I have to say that I absolutely LOVE this product!! It works perfect for mounting my walk-behind fertilizer spreader to the front of my truck while having the larger PermaGreen spreader on the back of my truck. Having this front-mounted hitch has allowed me to carry both of my spreaders and not sprain my back while wrestling the smaller spreader out of the bed of my truck as I had before.
This was the easiest installation of the 10 or more hitches that I have installed. Four bolts out and replaced with four suppler bolts and washer. No modification of the air dam needed.
I needed some washers (supplied) between the frame and the receiver as spacers. I recommended that you figure out how many you need (1 or 2 per side), then lower it down and tape them in place to hold them in place and push the bolts through the tape after you lift it back in place.
Cover the ground with a rug or cardboard to keep from scratching the receiver when it’s on the ground before you lift it into place.
Matthew
5/11/2021
Still good. No corrosion or other issues.
The hitch was a perfect fit for my 2002 Silverado. The how-to video was spot on as well, this is a very easy install and a great addition to your truck if you need a front hitch for a bike rack, winch, etc.
Was really surprised when I went to loop my bike lock cable through the bike wheels and then through the chain rings on the hitch...only to find out there were none!!!! I had just not paid attention close enough to the picture and even when installing it. Looking at other front receiver hitches, I found none had them. A little disappointing.
I purchased the front hitch for my truck. With a fifth wheel I can’t carry bikes anywhere but the front. I really don’t trust the strength of the rear bumper on these RV’s. Hitch went on easy in the garage with no alterations needed. The bikes sit a bit high but that’s not the hitch problem....
I will also use it for other functions around the truck...push/re-locate utility trailer in tight spaces, use for a rack to haul stuff like firewood etc...when back hitch is unavailable.
Everything mounted well. easy to install. The bolts that go through the side of the frame were 1/2" too short. I had to procure longer bolts to finish the install.
This hitch mounted to tow hooks just as described, even with existing brush guard. Needed it to haul a generator the only issue was the brush guard stuck out too far so I had to buy a 12" extender. Now every thing works as planned. Shipping was fast and customer service was great.
Thank You
This is the second hitch I've ordered for my truck. This hitch was very easy to install on the front of my GMC Sierra and is almost unnoticeable, which I like. I use it to transport a small Honda Trail 90 motorcycle, and it's 9000lb rating is well above what I am asking it to do. It arrived via UPS several days after ordering, was in good shape, and only took ten minutes to install with only two different size socket wrenches. Highly recommend this unit for the front of any truck.
The 31108 Front Mount Hitch Receiver was a perfect match for my 2004 GMC Sierra 3500. I seemed well built and the instructions were clear and easy to understand. I installed the hitch in under 45 minutes and that includes prep time. No special tools required. See photo attached.
Easy install; unobtrusive, but hitch receiver is far enough forward I can install the bike rack without needing an extension.
15 minute, piece of cake single-handed install. Instructions say cutting fascia optional on 2500. Not even close to needing to. Truck is 2005 Silverado 2500HD. Receiver sits up there nice and tight, so doesn't change ground clearances.
I purchased Curt’s custom front mount 2” hitch. Installation was easy, mounting points were accessible without necessity of a lift or floor Jack. In the year I’ve used it it has been very handy in pushing a dump trailer, car hauler, landscape trailer, diesel wood chipper uphill and around curved access and parking said trailers between other pieces of equipment and parked vehicles w/o the unfortunate scrapes and dents sometimes incurred while moving the same trailers into the same locations while attempting to back them into position. A very handy trailer hitch for parking a trailer in a crowded equipment yard.
Great product easy installation reinforces your front end will definitely buy again for my next truck
Front hitch for 2005 Chevy 2500hd that I ordered from etrailer.com
I would add to your instruction, if you have the factory hooks, remove the four bolts as stated and give to customer, " loosen the other two bolts on the outside of frame" this gives you a little wiggle room to start the new bolts. BUT great product and great people.
Got it fast.
Do you have a question about this Front Receiver Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
4/10/2026
Love hearing that, especially when it’s one of those installs that just goes smooth from start to finish. What are you planning to use it for? A winch or bike rack ?