Troubleshooting Right Blinker Circuit of Curt Wiring Harness for 2014 Acura RDX Not Active
Updated 04/21/2020 | Published 04/20/2020 >
Question:
Hi, I bought a used Acura 2014 RDX Advance pkg with Curt trailer hitch and this wiring harness, when connected to my trailer found that all lights working except right turn signal, tried unplug the 4 way connector and use a mutimeter to test on the vehicle side fount that no voltage on the green wire with right turn signal on, please advise. thanks,
asked by: Kanly
Expert Reply:
You've done a great job so far troubleshooting the Curt trailer wiring harness part # 56008 that you have on your 2014 Acura RDX. The next thing you should do is test for voltage on the green wire that feeds into the converter box of the kit. If there's voltage there that would indicate that the box is damaged and needs to be replaced with a new kit. If there isn't voltage there it could be a connection issue with the blue wire connector of the kit. Sometimes just unplugging and plugging back in will fix this. If not the problem is further up the wiring and most likely a fuse. Another thing to check would be to see if the vehicle blinkers are working properly.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Trailer Hitch
- Q&A: Trailer Wiring Needed to Tow a U-Haul Trailer with a 2017 Audi Q7
- Q&A: Troubleshooting Right Side Turn Signal Not Working On Trailer
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Troubleshooting a Curt Trailer Harness, Brake and Left Blinker Not Working
- Q&A: Troubleshooting Curt Trailer Wiring Harness Not Active at All
- Q&A: Trailer Turn Signals Not Working with Curt Trailer Wiring Harness on 2000 Toyota Sienna
- Q&A: How To Add a 7-Way To a 2017 Audi Q7
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: Clean Up Your Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: trailer wiring
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer tires and wheels
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Suspension Enhancement
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Search Results: trailer hitch ball mount
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller

