Replacement Vise Lock for Cam-Action Door Latch On Trailer Door

Question

Question:

Hello, My toy hauler came with Global Locks on the ramp door that look identicle to this product. One of the locks quit working and I need a replacement. The stamp on the key is G 346. I would like to order one of these locks from you but I need to verify that it is an exact replacement so that the bolt pattern matches. Can you help me with this? I have included a couple pictures. Thanks

asked by: Paul B

0

Expert Reply:

The Global Link Vise Lock for Cam-Action Door Latch part # 295-000024 will be a direct replacement for the vise lock you have on your trailer now. That said, it can only be ordered keyed alike which means if you order multiple and select this option they will all come with the same key. Unfortunately, they cannot be ordered keyed with a specific key code

expert reply by: Conner L

0

click to enlarge

Answer 1

Hey James! The etrailer Sidewind Trailer Jack #e38AV uses the standard 3-bolt A-frame mounting pattern, which is 3" apart on center. The mounting holes are also elongated, so there is a little wiggle room if the holes on your enclosed trailer…

view full answer...

Answer 2

Hi Edie; we haven't had any specific reports on whether or not the tailgate can sit open when hooked up to a trailer with the #LC733926 installed. To some extent this will depend on the ball mount you're using since that determines the height…

view full answer...

Answer 3

Hey Tris. I attached a diagram below that will show you the dimensions of the etrailer Manual Sidewind Trailer Jack w/ Drill Adapter item #e88GV. From the mounting plate to the bottom of the jack foot is 9-1/8". The etrailer Manual Sidewind…

view full answer...

Answer 4

The mounting holes for the Bauer Products Locking Cam Latch #BA32FR are spread 2-13/16" horizontally for the top 2 holes and 3-3/4" from the center line of the top holes to the center of the bottom hole(see image). The mounting holes for…

view full answer...

Answer 5

The Global Link Vise Lock you'd mentioned, part #295-000024 would be a good addition, but it would only replace the puck-style lock you'd used. You'll still need to replace the latch kit with something like part #PLR658-SSP. From your…

view full answer...

Answer 6

The Global Link Vise Lock for Cam-Action Door #295-000024 does NOT include installation hardware so you can select that locally. I suggest stainless or galvanized 6mm diameter hardware that is usually available at any full-service hardware store.…

view full answer...

Answer 7

I have a solution for you, but the Bauer Products Locking Cam Latch for Horse Trailers, #BA32FR does not have a keyed alike option. I recommend the Global Link Vise Lock for Cam-Action Door Latches, #295-000024 that does provide the keyed alike…

view full answer...

Answer 8

The best option I have for you would be to replace all the latches on the trailer or change out the lock cores. It looks like you have some of the common latches such as the Global Link Vise Lock part #295-000024, the Global Link RV Baggage Door Slam…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Vise Lock for Cam-Action Door Latch On Trailer Door

Product Page this Question was Asked From

Continue Researching