Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb A-frame jack uses a drill adapter so the lift happens without the handle. The coupler lines up faster, and the SnapPad stays planted on soft ground.
Cranking a loaded trailer tongue by hand can stall out halfway through hitching when the weight starts pushing back. This A-frame jack pairs a sidewind handle with a 3/4" integrated nut and included 3/4" socket, so you can switch to a drill and drive the jack up or down. Fold the handle out of the way, run the drill, and bring the coupler into position with less time spent working the crank.
Running out of lift strength or travel leaves the trailer stuck in place with the coupler short of the ball. This jack is rated for 2,000 lbs of maximum capacity with 14" of travel, giving you the range to raise or lower the tongue through the full hitching cycle. You can clear the hitch, line things up, and set it down where it needs to land without stacking blocks or resetting.
Unstable ground turns the front of the trailer into a balancing act when you're trying to park, load, or unhook. The jack uses a round removable foot plate for base support, and the Replacement Pad for SnapPad Jack Stand Pad System - 6" Round Jack Foot locks onto that foot to increase the contact area at the ground. With that added footprint in place, the jack stays planted on gravel, grass, or sand while the trailer remains supported during loading and while it sits unhitched.
Exposure to rain, road salt, and sun can turn a working jack into a seized replacement project. This one uses steel construction with an e-coat and glossy black powder coat on the outer tube and white zinc plating on the inner tube. The finish holds up through repeated raising and lowering, so the jack stays functional instead of locking up when you need it.
Ratings & Reviews
Very quick delivery
Part was exactly what I needed and was very easy to install. Quick delivery was a plus!!
This was a great upgrade to my trailer! Looks sharp, works perfectly and installed in about 20 minutes!
Do you have a question about this Trailer Jack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.