Is Mounting Hardware Included with the Global Link Vise Lock 295-000024

Updated 03/27/2018 | Published 03/25/2018

Question:

First of all - are 3 bolts included? If not, what is the hole dimension? If bolts are not included then I assume 2 of the 3 bolts that are required for this vise lock can be the 2 that are removed with the existing hasp is that correct? Since I need 2 GL Vise Locks can I also order 2 more bolts or 6 if the assumption is not correct? Thank you.

asked by: Ray D

Helpful Expert Reply:

The Global Link Vise Lock for Cam-Action Door # 295-000024 does NOT include installation hardware so you can select that locally. I suggest stainless or galvanized 6mm diameter hardware that is usually available at any full-service hardware store.

When you replace your standard hasp at least one of those existing holes can be reused. This part has three mounting holes; spacing of the holes is noted on the linked photo.

I measured the mounting holes; each of the three holes measures 7mm diameter, just slightly over 1/4-inch.

expert reply by: Adam R