bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Trailer Door Latch


  • Tips for Installing Trailer Cam Door Style Latch on Trailer With Door that Isn't Flush
  • To use a cam door style trailer latch on a trailer door that sticks out 1 inch past surface you'd want to use a spacer behind the latch mechanisms that attach on the door. I'd also go with a setup like the part # PLR258-002-SS which allows you to provide your own bar. You could attach the latch on top of the bar so that you get more offset as well.
    view full answer...

  • Door Locks for 2014 24ft Husky Cargo Trailer
  • The Global Link Vise Lock you'd mentioned, part # 295-000024 would be a good addition, but it would only replace the puck-style lock you'd used. You'll still need to replace the latch kit with something like part # PLR658-SSP. From your photos, it looks like they took a cut-off wheel to the latch handle. Replacing your existing setup would leave the trailer doors similarly vulnerable. I believe the best solution would be to use a layered approach secure the trailer to prevent or...
    view full answer...

  • How to Choose Replacement Latch for Tack Room
  • We likely have an option for you to replace your trailer's tack room lock, but there are no specific replacement parts for your trailer, and we don't have a way of looking anything up, so the best we can do is offer you a way to choose your replacement. To do you just need to know the style of your lock, as well as the measurements. For example, if it is a paddle lock, and has a cut out dimension of 2-3/4" x 3-3/4" then you would be able to use the Bauer Products Manger Door Lock for...
    view full answer...

  • Replacement Latches for 2003 Featherlite 4H Trailer
  • The best option I have for you would be to replace all the latches on the trailer or change out the lock cores. It looks like you have some of the common latches such as the Global Link Vise Lock part # 295-000024, the Global Link RV Baggage Door Slam Latch part # 295-000078, and the Global Link RV Entry Door Locking Latch Kit part # 295-000019. I have attached a full list below. In order to change out just the lock cores, you'll need to remove and measure your existing lock cores and...
    view full answer...

  • Keyed Alike Option for Cam Latches on Horse Trailers
  • I have a solution for you, but the Bauer Products Locking Cam Latch for Horse Trailers, # BA32FR does not have a keyed alike option. I recommend the Global Link Vise Lock for Cam-Action Door Latches, # 295-000024 that does provide the keyed alike option. This is an aluminum construction with a black powder coat finish and can be keyed alike to match other Global Link locks too, not just matching cam locks. So if you have other locks on your trailer aside from the cam locks, please consider...
    view full answer...

  • Avion Argonaut 1969 Screen Door Latch Replacement
  • Screen door latches are easy to replace. You will simply need the Bi-Directional Screen Door Latch # 37206-11865 or the Bullet Door Latch for RV Screen Door # 37210785. The access to the latch on the ouside is not covered and from the inside you simply slide the bubble cover to the side to access the handle and then return it to cover the handle and keep bugs out.
    view full answer...

  • Matching Latch with Lockable L-Handle 37210895
  • You'd need to use a Universal Cam for T-Handle or L-Handle # 37210925 with the lockable handle like part # 37210895 that you referenced.
    view full answer...

  • Replacement Handle Assembly Latch Kit and Pipe Retainer
  • We do offer replacement pieces for the Cam-Action Lockable Door Latch for Fold Down Trailer Gate or Side Door - Stainless Steel item # PLR258-002-SS you purchased. Replacement Hasp for Polar Cam-Action Latch Kit - 2" Wide - Zinc-Plated Steel item # PLR258-101 Replacement Handle Assembly for Polar Cam-Action Latch Kits - Zinc-Plated Steel item # 158-100 Replacement Top Pipe Retainer for Polar Cam-Action Latch Kits - Zinc-Plated Steel item # PLR158-209
    view full answer...

  • Bauer Locking Cam Latch #BA32FR Key Hole Rubber Cover
  • We have a rubber key hole cover for the Bauer Cam Latch # BA32FR with the part # BA49VR. It does not come with this cover.
    view full answer...

  • Replacement Window Latch for 2001 Cherokee Gooseneck Horse Trailer
  • Thank you for the dimensions of your window latches. Based on that the Bauer Products Manger Door Lock for Horse Trailers # BA55FR that you referenced is the correct replacement.
    view full answer...

  • How To Choose the Correct Length Bar for the Cam-Action Lockable Door Latch
  • In regards to Cam-Action Lockable Door Latches like part # 305736, the longer bar you have for the cam lock, the more support it will offer. If you have a heavy, tall door then you'd want to consider looking into a longer bar whereas if you have a smaller, lighter door then you can use a shorter bar. That said, I don't have any formula to use for this, it's up to the installer's discretion. If you need one longer than 36" then you can get part # PLR3057 and choose your own bar size.
    view full answer...

  • Getting Replacement Keys for Blaylock Trailer Coupler Locks
  • We can help as long as you know which key number you need. It would have been stamped on the initial keys you had. We have a total of 5 key replacements for Blaylock locks like the # BLDL-80 that you referenced. Blaylock Industries Replacement Key 51131: # BL040-TL38KEY51131 Blaylock Industries Replacement Key 51132: # BL040-TL38KEY51132 Blaylock Industries Replacement Key 51133: # BL040-TL38KEY51133 Blaylock Industries Replacement Key 51134: # BL040-TL38KEY51134 Blaylock Industries...
    view full answer...

  • Which Size Carriage Bolt Fits Mounting Holes on Replacement Hasp for Polar Cam-Action Latch Kit
  • The correct size carriage bolt to mount the Replacement Hasp for Polar Cam-Action Latch Kit - 2" Wide - Stainless Steel # PLR158-102-SS would be 3/8". I have attached an installation video for your reference.
    view full answer...

  • Does Etrailer Sell A Double Sided Slam latch
  • The Bauer Products Manger Door Lock # BA95FR cannot be operated from the interior side. I recommend going for the Global Link RV Baggage Door Slam Latch with Keyed Alike Option # 295-000002. This will give you entry to both outside and inside of the trailer. I linked a video below on the Global Link RV Latch # 295-000002
    view full answer...

  • What Is Global Link Vise Lock 295-000024 Made Out Of?
  • I reached out to my contact at Global Link and the Global Link Vise Lock for Cam-Action Door Latch - Keyed Alike Option - Black # 295-000024 you were looking at is made out of aluminum, not steel. The reason the black version # 295-000024 is more expensive than the white # 295-000026 or silver # 295-000025 is due to the popularity of the black version. Since significantly less people or purchasing the other two colors, that makes their price go down. I included a video of the # 295-000024...
    view full answer...

  • Polar Hardware Side Door Bar Lock Assembly In Aluminum Finish
  • We will not have the entire assembly like the Side-Door Bar Lock Assembly # 305736 is in aluminum finish. We have the Economy Side Door Lock - Aluminum # PLR1057-A that includes everything but the 3/4" pipe. You would need to source the correct size pipe to complete the kit.
    view full answer...

  • Can Bauer Products Manager Door Lock BA55FR Be Ordered With A Specific Key Code?
  • I have another option for you, but the Bauer Products Manger Door Lock for Horse Trailers - Matte Black - Zinc - Left Hand # BA55FR you were looking at cannot be ordered with a specific key code. To get multiple locks with the same code you would need to order each product at the same time, with the keyed alike option selected on each product and making sure they are the same brand. I included a video of the # BA55FR for you to take a look at.
    view full answer...

  • Will the Lock Side-Door Bar Lock Assembly Fit Over a Door Latch
  • That would depend on several different factors such how much the door sticks out away from the trailer and how much the handle sticks out away from the door. However, if you do run into clearance issues you can always install a spacer on the hinge for the Lock Side-Door Bar Lock Assembly part # 305736 which you can see in the attached photo. We don't carry these spacers but I am certain you would find something at your local hardware store. Unfortunately, there wouldn't be a way for...
    view full answer...

  • Smaller Sized Trailer Spring Latch
  • The smallest spring latch we have is the Paneloc Heavy Duty Spring Latch # F719-272U which has a bracket width of 2 inches and a pin length of 4-1/8 inches.
    view full answer...

  • Replacement Vise Lock for Cam-Action Door Latch On Trailer Door
  • The Global Link Vise Lock for Cam-Action Door Latch part # 295-000024 will be a direct replacement for the vise lock you have on your trailer now. That said, it can only be ordered keyed alike which means if you order multiple and select this option they will all come with the same key. Unfortunately, they cannot be ordered keyed with a specific key code
    view full answer...

  • Bar Dimensions Compatible With Polar 258-002 Cam-Action Lockable Door Latch Kit
  • I went out to our warehouse to take measurements of the Cam-Action Lockable Door Latch Kit for Large Enclosed Trailers - Zinc-Plated Steel # PLR258-002. The bar you will need is 3/4 inches inner diameter and can be up to 1-1/8 inches outer diameter to fit in the brackets and move properly. I've attached a photo to assist.
    view full answer...

  • Hole Spacing of 45 Inch Long Side-Door Bar Lock Assembly
  • I'll give you a number of different dimensions for the hole spacing as I'm not entirely sure what you were specifically looking for on the 45" Long Side-Door Bar Lock Assembly # PLR3057-45. From the top mounting hole to the bottom mounting hole (on the hinges) it measures 43-1/2 inches; the closest holes on the hinges are 37 inches apart, and the holes on the hinges are 3-1/4 inches apart.
    view full answer...

  • Is it Possible To Key Blaylock Trailer Locks To Match Existing Trailer Locks
  • If all of your current locks are Blaylock locks, it may be possible. If they are a different brand, it is not possible to get them keyed alike. The Blaylock Door Lock for Enclosed Trailers part # BLDL-80 can be ordered keyed alike if you purchase multiple locks at once by clicking the "keyed alike" option on the product page. Since you need the Blaylock door lock to be keyed the same as your existing locks we need to go to the warehouse and check inventory for stock of your specific...
    view full answer...

  • Can Lock Core be Swapped to Match Existing Locks on Bauer Products Compression Latch
  • I reached out to Bauer Products and they said you can swap out the lock core on your current Bauer Products Compression Latch for 2" Thick Ramp Doors - Matte Black # BA67FR with the new one so your locks match. They also said that this will need to be performed by a dealer, so you will need to find one that is able to switch out the lock core.
    view full answer...

  • Key Locking Handle with 5/16 Inch Shaft
  • We have the Red Line handle, part # 276, that has a 5/16 inch square shaft. It doesn't look as much like your handle as # PLR7011L, and isn't as heavy-duty, but it's the correct size shank and still locks. This is the closest option to your handle that we carry.
    view full answer...

  • Replacement Tack Room Door Latch for Horse Trailer
  • We have a few options for door latches that might be good replacements for yours. There is the Bauer Products Manger Door Lock for Horse Trailers # BA95FR. This is designed for a vertical oriented door latch. We also have a horizontal opening style. That would be more like the "Junior" Locking Stainless Steel Flush Door Latch with Inside Release # L1833. If neither of these are the style that you have, feel free to send me a picture so that I can find a fit for your trailer.
    view full answer...

  • 1997 Bison BP 2H Straight Load Horse Trailer Dressing Room Door Latch
  • The "Junior" Locking Stainless Steel Flush Door Latch with Inside Release part # L1833 is designed to fit a 2-3/4" by 2-3/4" opening. While I can't be for sure what size opening you have the Junior does offer the interior release to get back out. If your has a different size opening please let me know and I can advise you of options that fit.
    view full answer...

  • Dimensions And Operation Of Non-Locking Steel Flush Door Latch # N3980
  • We have the Non-Locking Steel Flush Door Latch, part # N3980 in stock, but there are a few changes you need to be aware of. I have attached a couple photos that show the difference between the latch shown on our website and what we actually have. I called our supplier and they said they were having a hard time getting the latches shown on our site. They used a different supplier for a short time and this is the result. They do not have a time line when the latches with the original...
    view full answer...

  • Availability of Heavy Duty Spring Latch With 3/4" Pin
  • We sure do! There are two different spring latches offered with a 3/4" diameter pin. The Paneloc Heavy Duty Spring Latch # F784-102Z which has a mounting bracket that measures 3" long x 1" wide x 1-1/2" tall, or the # 788-S-ZINC which has a mounting bracket that measures 4-1/8" long x 3" wide. I recommend measuring the size of the area you have to mount the spring latch to so you can best choose the correct option for your needs. I included videos for both of the products mentioned...
    view full answer...

  • Horse Trailer Door Latch With 3-3/4" X 2-3/4" Hole Cutout
  • The Bauer Products # BA55FR seems like a match as it is the same style latch and the cut out measurements match. This has a powder coat finish over die-cast zinc construction so it should last a long time. Includes one year warranty.
    view full answer...

  • Length of Paneloc Spring Latch Handle
  • The pin handle of the Paneloc Heavy Duty Spring Latch # F779-204U234 is roughly 2", and the overall length of the pin is 5-7/8". I've attached a link to a review video for you to check out as well.
    view full answer...

  • Handle Attachment on the Deadbolt Lock with Inside Safety Release
  • The Deadbolt Lock with Inside Safety Release part # PLR7011S does not have a handle attachment point. In most cases a handle is attached to the actual door and is used to open and close it while this is to keep it secure.
    view full answer...

  • Installation Hardware for Global Link Vise Lock Door Latch
  • To install the Global Link Vise Lock for Cam-Action Door Latch # 295-000024 you can use the Self-Tapping Screw - 1/4" -14 x 3/4" Long - Zinc # FA1131822.
    view full answer...

  • Does the Side-Door Bar Lock Assembly part # 3057-55 Come in a 65" Length
  • The 55" Side-Door Bar Lock Assembly part # 3057-55 is the longest that I have available for this application. A possible solution for you would be to use the Bracket Assembly for Polar Economy Side Door Lock part # PLR3057-100 which would allow you to add your current length bar and handle to add to these and restore your factory set up. Since these are designed to hold the door shut it really doesn't matter if it is 65" or 55" as long as it holds the door shut. I do understand however...
    view full answer...

  • Keeper for Paneloc Spring Latch, Slam Latch
  • The Paneloc Heavy Duty Spring Latch, # F720-172Z105, is not sold with a separate keeper. The Paneloc Slam Latch with Cover - 2" Long x 1-5/8" Wide - Stainless Steel, # F708-204P011, does come with a keeper.
    view full answer...

  • Will the Polar Heady Duty Camp Action Door Lock Work to Latch Horse Trailer Dutch Doors to Ramp
  • The Polar Heavy-Duty Cam Action Door Lock for Enclosed Trailers # PLR258-002 that you referenced will work well for you to add dual cam door locks to the dutch doors and ramp of your horse trailer. This cam action door lock can work for both right or left hand doors, so the same part number with work for both of the dutch doors on your trailer. The # PLR258-002 is designed for use with a 3/4 inch pipe, which is not included. This pipe can be found at your local hardware store.
    view full answer...

  • Measurements of Global Link Vise Lock # 295-000024 to Determine Fit on a Featherlite Horse Trailer
  • You would need to go by the dimensions of the Global Link Vise Lock # 295-000024 to determine fit. The 2 mounting holes at the top are spaced 2-13/16 inches apart on center. And from the center of those holes to the center of the bottom hole is 3-11/16 inches. Overall the lock is 6-1/2 inches by 3-1/2 inches by 1-1/4 inches.
    view full answer...

  • Replacement Tack Room Door Latch for CM Dakota Horse Trailer
  • It would appear that your CM Dakota horse trailer uses a door latch like the Locking Steel Flush Door Latch with Inside Release # L1930. I have included an image with the measurements for this latch. Please let me know if your latch is different than these measurements.
    view full answer...

  • Dimensions of Cam-Action Lockable Door Latch for Large Enclosed Trailers
  • The Cam-Action Lockable Door Latch Kit for Large Enclosed Trailers - Stainless Steel # PLR258-002-SS has the following dimensions as I measured them in our warehouse: Hasp dimensions are 5-1/8" tall x 2" wide 3-3/4" From center of hole to center of hole Lock hole diameter: 1/2" Retainer dimensions: 4-1/2 tall x 1-1/2" wide Measures 3-1/8" from center of hole to center of hole Handle length: 14" Mounting hole diameter: 13/32" Keeper dimensions: 5-1/8" long x -1-1/2" wide Measures...
    view full answer...

  • Is There a Required Handle Thickness for the Stainless Steel Hasp PLR158-102-SS
  • The Stainless Steel Hasp part # PLR158-102-SS works with most standard 1-1/4" wide handles. I did check with the manufacturer but they do not call out a specific handle thickness nor do any of the other hasp manufacturers. I can however confirm the Stainless Steel Handle Assembly part # PLR158-100-SS will fit and work well. It should be a standard size thickness for most handles so I really don't think there will be an issue.
    view full answer...

  • Is 36 Inch Lock Side-Door Bar Lock Assembly # 305736 Available in Right Hand and Left Hand Models
  • The Redline 36 Inch Side-Door Bar Lock Assembly, # 305736, can be used on the right and left side. The image on our product page shows it in the left hand orientation, but it can be used on the right hand side by flipping it upside down. Check out the photo that I attached.
    view full answer...

  • Available Trailer Door Parts for Cam Door Lock
  • I linked our main pages for trailer cam door locks and for all door-related items to help you see our wide range of products. These include cam door locks such as # 383200. Although we do not handle the Imperial Stamping products odds are very good that we can help you find what you need. If you cannot find what you're looking for on the linked pages you can submit a photo of your trailer lock and/or the part you need that will help a lot.
    view full answer...

  • What Keeps the Latch in the "Junior" Non-Locking Steel Flush Door Latch # N1980 Secure
  • There is an indention in the bracket over the latch on the "Junior" Non-Locking Steel Flush Door Latch # N1980 which keeps it from falling out. I have pointed this out in the attached photo.
    view full answer...

  • Do Cams Need to be Welded to 3/4" Pipe to Install the Polar Cam-Action Lockable Door Latch Kit
  • Yes, the cams (as well as the handle) need to be welded to a 34" Schedule 40 Plumbers Pipe with a 1.06" outer diameter for proper installation of the Cam-Action Lockable Door Latch Kit # 383200. To keep the pipe from dropping down when the door is opened you will just need to install one of the retainers just below the handle as you can see from the attached photo a customer sent in.
    view full answer...

  • 1994 Four Star Horse Trailer Replacement Locking Latch
  • You can definitely try the Full Size Locking Steel Flush Door Latch Item # L3980 but the opening for the original lock may have to modified to accommodate the new latch. We do not offer that type of locking door latch or a latch that size that could replace it. I recommend contacting the manufacturer of the actual door latch to see if there may be a direct replacement.
    view full answer...

  • 1997 Exiss SX Horse Trailer Door Handle Replacement
  • If the hole in your door for the handle measure 2-3/4" x 3-3/4" the # L4080 would work, but most likely you would need a handle like the part # L1883 as that is more like the latching style of your current handle. This latch installs in the same size hole.
    view full answer...

  • Is Installing the Cam-Action Lockable Door Latch Kit Easy
  • Installation of the Cam-Action Lockable Door Latch Kit w/ Narrow Hasp for Small Enclosed Trailers # 383200 is generally regarded as pretty easy, but unfortunately the manufacturer makes no instructions available for this kit for some reason. However, all you need is a pipe with a 3/4" inside diameter and the handle and cam ends will need to be welded to the pipe; the rest of the application gets bolted on.
    view full answer...

  • What Width is Replacement Hasp for Polar Cam-Action Latch # PLR158-102-A Designed to Fit
  • Yes the part # PLR158-102-A was designed to be used with handles that are 1-1/4 inches wide like you mentioned having.
    view full answer...

  • Which Replacement Door Latch for 1991 Sooner Trailer
  • The easiest way to find a replacement is find the dimensions of the hole that the latch sits it.The Flush Locking Stainless Steel Latch, part # L1833. The latch fits in a 2-3/4 inch by 3-3/4 inch hole and features an inside release. The larger # L3980 you referenced would mount into a 3-3/8 by 4-5/8 inch hole. It doesn't use an inside release, but you can easily add the # 4PLSP knob. Unfortunately, I don't have any reference material that provides any part numbers or manufacturers for...
    view full answer...

  • Availability of Stainless Steel Trailer Side-Door Bar Lock Assembly
  • The Polar 55-Inch Side-Door Bar Lock Assembly # 3057-55 features galvanized steel construction but they do offer a universal kit with stainless steel components, part # PLR158-SS. This kit does NOT include the 3/4-inch diameter pipe so that one part you will source locally. Since you provide the pipe you can control the exact size of the lock set-up to best fit your trailer door. Polar also offers a heavy-duty version # PLR258-002-SS which is designed for flush to 3/4-inch-offset doors....
    view full answer...

  • Does the Replacement Hasp for Cam-Action Latch Include Hardware?
  • The Replacement Hasp for Polar Cam-Action Latch Kit - 2" Wide - Aluminum # PLR158-102-A does not come with the hardware to install. It comes only with the parts your see and is made of rust proof aluminum, so you will want to use Zinc hardware for installation with carriage bolts that have about a 1/2 inch head diameter. You can find the bolts and nuts required at any local hardware store.
    view full answer...

  • Determining Which Replacement Door Latch and Strike Plate Fits 1998 Titan Angle Haul 3 Horse Trailer
  • I would be happy to help you determine which replacement door latch and strike plate fits your 1998 Titan Angle Haul 3 horse trailer, but unfortunately we do not have a breakdown of the specific components your trailer uses. The Bauer Products Manger Door Lock for Horse Trailers - Matte Black - Glass Filled Nylon # BA95FR you were looking at includes the door latch, and the strike plate you mentioned that you were needing, and is designed to fit doors with a standard cutout measuring...
    view full answer...

  • Can Redline Locking L Style Door Handle # 276 Turn More than 90 Degrees
  • There is nothing internally on the Redline Locking "L" Style Door Handle # 276 that keeps it from rotating freely. This will turn more than 90 degrees as long as your existing locking system allows this. This handle features a 2-1/2 inch long shaft that is 5/16 inch square. Two keys are included.
    view full answer...

  • What Size Bar Latch Can Fit Into Global Link Vise Lock # 295-000026
  • The tallest bar latch that can fit into the Global Link Vise Lock # 295-000026 that you referenced is 1-1/4 inches.
    view full answer...

  • How Does the Pipe Attach to the Cam Lock Assembly on Polar 658-002?
  • According to the manufacturer the pipe is the 1 inch schedule 40 pipe which means the inner diameter is 1 inch and the outer diameter is 1-5/16" so the attached video and the video are correct. I have also attached a photo from the manufacturer to show you the locations of the Anti-Rack Ring you requested. They will be located just under the top bearing bracket and just above the bottom bearing bracket. You will weld these rings to the pipe as well as the cams at each end and the handle....
    view full answer...

  • How to Install a New Side-Door Bar Lock Assembly # 305736
  • Installing the Hinges on your Side-Door Bar Lock Assembly, item # 305736, is pretty much up to you and the construction of your trailer. You will need to purchase appropriate hardware to install the Side-Door Bar Lock that you purchased. It is best if you can find a sound structural support in the trailer framing to bolt the Side-Door Bar Lock to and still allow the bar to make contact with the face of the door. I have posted a photo of the # 305736 Side-Door Bar Lock, installed on...
    view full answer...

  • Recommended Bar Style Lock for Trailer Doors
  • For your 56 inch Lock Side Bar Lock similar to # 3057-55 I recommend the Economy Side Door Lock - Stainless Steel # PLR3057-SS. This will allow you to customize your length using a 3/4 inch pipe which is not included. This style of lock normally doesn't need to be within an inch, so I also have attached another style of lock that may be what you are looking for. It is the Cam-Action Lockable Door Latch Kit w/ Narrow Hasp for Small Enclosed Trailers - Zinc-Plated Steel # 383200. ...
    view full answer...

  • Is it Possible to Defeat the Blaylock Door Lock # BLDL-80
  • If a thief has the time and opportunity they usually get what they want. If a thief was dedicated enough to breaking into your trailer that he would go the lengths you described to defeat the # BLDL-80 he would probably also find other ways (much easier ways),to get in your trailer. Theft deterrents like the # BLDL-80 are designed to frustrate the average opportunistic thief to the point where they move on from trying to break into your trailer. If you find a guy who is willing to go...
    view full answer...

  • Is Mounting Hardware Included with the Global Link Vise Lock 295-000024
  • The Global Link Vise Lock for Cam-Action Door # 295-000024 does NOT include installation hardware so you can select that locally. I suggest stainless or galvanized 6mm diameter hardware that is usually available at any full-service hardware store. When you replace your standard hasp at least one of those existing holes can be reused. This part has three mounting holes; spacing of the holes is noted on the linked photo. I measured the mounting holes; each of the three holes measures...
    view full answer...

  • Can the Buyers Products Spring Latch Be Used as a Left Hand and Right Hand Latch
  • Yes. The Buyers Products Spring Latch - 3" Long x 1-3/4" Wide - Zinc Plated # BP34FR can be used as a left hand or right hand latch all the same.
    view full answer...

  • Is There a Stainless Steel Bar Offered for the Stainless Steel Economy Side Door Lock
  • We do offer the Economy Side Door Lock part # PLR3057-SS with a 36" steel bar as part # 305736 but it's not stainless. If you prefer stainless you'll have to source the rod locally.
    view full answer...

  • Hardware For Cam-Action Lockable Door Latch
  • A 1/2 inch bolt is needed, with the size depending on your application for the Cam-Action Lockable Door Latch for Fold Down Trailer Gate or Side Door - Stainless Steel # PLR3057-SS.
    view full answer...

  • Hasp Replacement for Enclosed Cargo Trailer Cam Door Lock
  • We offer two Paneloc lock hasps that are 1-1/2-inches wide, parts # H145-203E and # H135-203E, both of which are shown on the linked page. We also offer cam door latches like 2-inch # PLR158-102-A and # PLR158-102-SS, as well as 1-inch hasps like # 158-101, but not one that is 1-1/2-inches. I also included a link to our page for complete cam door lock assemblies in case you wish to install a complete new lock.
    view full answer...

  • Keyed Alike Flush Mount Locking Door Latches
  • I called my contact at Redline, and they told me that they use the same lock and key for their flush mount door latches. So you could order 4 of part # L1883 and they would all be keyed alike. If you need a larger latch, 4 of part # L3980 would also be keyed alike. Both of these flush mount locking door latches use the same key number.
    view full answer...

  • Can the Redline Locking "L" Style Door Handle Be Rotated Prior To Installing
  • The Redline Locking "L" Style Door Handle part # 276 will spin freely until it is secured into the latching mechanism. Therefore, the latching mechanism would be the component that limits the rotation.
    view full answer...

  • Replacement Locking Door Latch for 1994 Wells Cargo Trailer
  • I researched circa-1994 Wells Cargo trailers but I could not find any confirmed specs for the particular door latch they used on their various sizes of trailers. Most do use a flush-mount latch like Redline # L3980 and # L1883. You'll need to remove the old latch and measure the opening to find the correct replacement latch. Part # L1883 mounts in an opening that measures 2-5/8 x 3-3/4 and part # L3980 mounts in a hole that measures 3-3/8 x 4-5/8. For the inside knob you can use part...
    view full answer...

  • T-Handle Locking Stainless Steel Flush Door Latch # L4080 Dimensions
  • The # L4080 mounts in a hole that measures 2-3/4" x 3-3/4". I attached a picture that has every other dimension as well. The bolt pattern is 3-1/4 inches vertically and then 3-3/4 inches horizontally.
    view full answer...

  • Is Hardware Included with Polar Replacement Hasp # PLR158-102-A
  • The Polar Replacement Hasp # PLR158-102-A that you referenced does not include the hardware needed to install the unit. The specific hardware size that will be needed really depends on application so it's not something Polar makes available with the hasp. You will just want to make sure to use some Zinc hardware with carriage bolts that have about a 1/2" head diameter. These should be readily available at any local hardware store. I have attached a short video review that you can...
    view full answer...

  • Universal Cam-Door Lock Recommendation for Toy Hauler that the Door Does not Close all the Way
  • I believe I know what is happening. It sounds like your door latches are at the middle of your door which leaves the top of the door slightly open. You could use a Universal Cam-Door Lock for Enclosed Trailers # like what you referenced. I would run it across the top lip of your trailer ramp so that it will secure the top of the door as well. Depending on the setup you might consider leaving your current latches and then install a # 383200 as well. Or, you could move your current...
    view full answer...

  • Available Replacement Door Latch to Fit an Wells Cargo Trailer
  • The Redline Flush Mounted Door Latch, # L3980, will mount in a door that has a 3-3/8 x 4-5/8 inch mounting hole. This latch is rust proof and will attach to the door using screws instead of pop rivets. If this latch cannot fit into your door's mounting hole area, then please take a few measurements of this hole. Find the length, width of the mounting hole and the thickness of the door. Once you have found these measurements contact us and we will be happy to try to find a latch that...
    view full answer...

  • Distance Between Mounting Holes of JR Products Locking L-Handle # 37210895
  • The distance between the mounting holes of the JR Products Locking L-Handle # 37210895 is 1.5 inches.
    view full answer...

  • Can I Use The 55" Lock Side-Door Bar Lock part # 3057-55 on Both Left and Right Side Of Ramp Door
  • The 55" Lock Side-Door Bar Lock Assembly part # 3057-55 are designed to open flat to allow you to install on the both the passenger and driver side (left and right). I have attached a very helpful video for your reference.
    view full answer...

  • Locating Replacement Latch Locks for 1995 Kingston Two Horse Trailer
  • It's a little hard to see exactly what kind of lock your Kingston Horse Trailer is equipped with on the picture but from what I can tell it looks awfully similar to a flush-style latch like the Paddle Handle Locking Latch # PLR5115. Unfortunately trailer manufacturers don't typically do a good job of keeping track of information like this (or sharing it if they do) so I'm not able to verify an exact replacement based on the trailer model. Your best bet will be to take a few measurements...
    view full answer...

  • Mounting Hole Dimensions for the 55" Lock Side-Door Bar Lock Assembly # 3057-55
  • I went and pulled a 55" Lock Side-Door Bar Lock Assembly # 3057-55 from our warehouse to get the dimensions you requested. The length from the top mounting hole of it down to the bottom mounting hole is 53-1/2 inches, the distance between the holes of the mounting brackets is 3-1/4 inches, and the distance from the center of the handle to the top mounting hole is 26-3/4 inches.
    view full answer...

  • Using Paneloc Slam Latch for Work Truck Drawers
  • There is not a specific strike plate that comes with or is compatible with the Paneloc Slam Latch # F707-104Z ; the best potential solution I can offer you is the Valterra Replacement Strike Plate # L32PB060 , but I'm not thinking that is going to be the best solution. In order to use this the way you're intending you would likely need to fabricate something on your own, or you could potentially source something from your local hardware store.
    view full answer...

  • Is Welding Required for the Handle on the Cam-Action Lockable Door Latch Kits
  • I do have an option for you but the handles included with the Cam-Action Lockable Door Latch Kits like part # PLR658-SSP must be welded to the pole as there are no other options to attach them. If you can get away with a 55" long pipe then you can use the 55" Lock Side-Door Bar Lock Assembly part # 3057-55 which is already welded for you but best option would be to obtain the above and just run by a local muffler shop and have them tack the new handle on as I am sure they would not change...
    view full answer...

  • Available Locks and Replacement Parts for Horse Trailers
  • We have all sorts of door and vent parts for all types of trailers. And we can help you find items specific for horse trailers too; just click on the link provided to see all categories of items for horse trailers. Next click on the heading Door Latches, first image on the second row, to see just those items, such as flush latch # PLR5115 and # L3980. We also have Side-Door Bar Lock Assembly locks like # 305736.
    view full answer...

  • Replacement Paddle Style Handle for a Wells Cargo Trailer
  • As you have come to find out, the paddle style handle you have on your Wells Cargo Trailer is very large and they just don't make anything that large to replace this nowadays. The largest paddle style handle we have is the Paddle Handle Locking Latch w/ Release part # PLR5115 which installs in a 4-5/8" long x 3-3/8" tall cutout and is made of metal so it wont break. Therefore, in order to make this work for you, you would need to fill in the remaining space but aside from this I just don't...
    view full answer...

  • Replacement Lock For Trailer Feed Door Latch
  • To ensure that the Economy Side Door Lock PLR3057-SS will work with your trailer feed door latch, I have attached a picture showing the various mounting dimensions needed to install this product. The handle measures 12-1/2", with the mounting bracket that is extended to 13-3/4" The mounting holes for the 3/4" bar (not included) measure 3-1/4" apart on center The bracket that holds the handle has mounting holes 4" apart The hole for the shackle of your lock measures 1/2" in diameter Let...
    view full answer...

  • Replacement Plastic or Rubber Coating for Cam Door Lock Handle
  • The only grip/cover we have is the Replacement Rubber Handle Grip for Cam Door Lock Handle # FVH200. This is 3 inches long by 2 inches wide and 1/4 inch tall. I've attached a photo to assist.
    view full answer...

  • Replacement Cam Door Hasp for Enclosed Trailer
  • Sounds like you are looking for the part # PLR158 which is basically the cam door latch that you mentioned without the bar. Or if you need just the hasp part we have the # 158-101.
    view full answer...

  • Replacement Bargman L-300 Locking Latch
  • I did some research on the Bargman L-300 lock that you mentioned in your question, and it appears that these have not been made in a long time. Specific replacement parts for this particular line are no longer produced. If you are needing to replace the lock, I recommend looking at a similar design handle lock like the Redline Full Size Locking Steel Flush Door Latch # L3980. This will mount in a 3-3/8 inch x 4-5/8 inch hole and will work on doors up to 1-1/16 inches thick. I have...
    view full answer...

  • Flush Mount Door Latch for Cargo Trailer Side Door
  • Thank you for the detailed photo, it was a great help. The latches are actually not designed to fit the thickness of the door so you could use whichever size would allow the pin to catch in the door lip. f you were able to make it so the door did not have a gap, then you could use a door latch such as the Paneloc Slam Latch # F708-204P011, which is 2" long x 1-5/8" wide with a mounting hole diameter of 3/16" and a pin width of 7/16". A different option would be the Paneloc Slam Latch #...
    view full answer...

  • Recommended Hasp and Handle Keeper with Mounting Holes of 3-3/4 Inches
  • Great news! We do have a hasp and handle keeper with the mounting holes 3-3/4 inch apart. The part number you are looking for is the # PLR258-101. I have linked it to this page for your purchasing convenience.
    view full answer...

  • Replacement Tack Room Door Latch for Horse Trailer that Measures Near 3-3/4 X 4-3/4
  • For the size you listed it sounds like you need a full-sized door latch like the part # L3980 that mounts in door openings that are 3-3/8" x 4-5/8" hole. This is a very common door latch seen on horse trailer as well.
    view full answer...

  • Replacement Cargo Door Latches for 1994 Wells Cargo Trailer
  • Trailer makers do not maintain record of smaller items like the specific latches they install on compartment doors but many of these OEM products come from one of a few major suppliers like Polar and Lippert Components who produces most trailer frames made in the U.S. Since your photo did not come through to us you can send them to me via reply email along with dimensions and I will try to identify a replacement. Or you can review the linked pages which display our range of trailer...
    view full answer...

  • Recommended Handle Latch Kit for Barn Door on Dump Trailer
  • For the barn door on your dump trailer, I recommend looking at the Cam-Action Lockable Door Latch Kit # 383200. This is a nice steel cam-action door latch with a 1 inch wide hasp that can be installed flush on doors with a 3/4 inch offset. It features a bridge-type hasp that will help to prevent accidental opening and secures a safe latching action. This will use a 3/4 inch diameter pipe that you can source from a local hardware store. This will be a simple bolt-on installation. I have...
    view full answer...

  • Availability of 60 Inch Cam-Door Style Lock Kit
  • The 55 Inch Lock Side-Door Bar Lock Assembly # 3057-55 referenced in your question is also available in a 36 inch size, with part # 305736, however there is not a 60 inch unit currently available. I instead recommend looking at the Polar Cam-Action Lockable Door Latch Kit # 383200. This steel cam-action door latch is a more universal design that does not include the 3/4 inch inner diameter pipe. This will allow you to use this kit with a pipe that features a length of your choice, as...
    view full answer...

  • Hardware Needed To Install 36 Inch Lock Side-Door Bar Lock Assembly
  • To install the 36 Inch Lock Side-Door Bar Lock Assembly # 305736 you will want to use carriage bolts, nuts, and washers. There is not a part number that includes this hardware for # 305736. You will want to use 5/16 inch carriage bolts to secure the latch to the trailer. You can find these carriage bolts at your local hardware store.
    view full answer...

  • Type/Size of Hardware Needed to Install Side Door Bar Lock Assembly #305736
  • Although there are no hardware kits available to install the Polar Lock Side-Door Bar Lock Assembly # 305736 we have found that you can use 5/16 inch carriage bolts along with some nuts and washers that are compatible with the bolts. All of which can be acquired at your local hardware store and should be bought with either a galvanized finish or stainless steel.
    view full answer...

  • Can a Universal Cam-Door Lock for Enclosed Trailers be Used in the Horizontal Position
  • It is possible to use the cam-door lock, # 383200, horizontally but it would need to be placed up higher than the midway point to reduce the amount of stress on it when the door is closed. Take a look at the picture I have included that shows this type of set up. For a lock you could use # BLDL-80.
    view full answer...

  • Does Global Link Vise Lock for Cam-Action Door Latch Fit Cam Door Lock on Trailer
  • Yes, the Global Link Vise Lock for Cam-Action Door Latch # 295-000024 that you referenced actually was designed for exactly your application. It replaces the hasp of the cam door lock that you have like part # 305736 and converts it basically into a lock assembly.
    view full answer...

  • How Does Paddle Handle Locking Latch # PLR5115 Normally Fit Door
  • I attached a couple pictures that show how flush latches like the part # PLR5115 that you referenced install. One shows the cutout and the other shows how the latch fits into it. You'd drill holes through the flange and door and use hardware that you'd have to provide to secure it.
    view full answer...

  • Rear Door/Ramp Latch for Holding Horse Trailer Ramp in Place
  • Sounds like you have a rear ramp/door on a horse trailer and need a cam style latch to hold it in place when shut. For that the 36" Lock Side-Door Bar Lock Assembly # 305736 can be used for this. It would be just a matter of mounting the assembly on top of the ramp/door to hold it up there. Or you could use two of these, one on each side and that would work as well. There are holes on the latches that you can run a padlock through like the # ML1KA. If you have something totally different...
    view full answer...

  • How to install Full Size Locking Steel Flush Door Latch on a Trailer
  • The Full Size Locking Steel Flush Door Latch # L3980 is designed to fit 1-1/16 inch thick doors and mounts in a hole that is 4-5/8 X 3-3/8 inches. If there are no screws visible, then your existing latch is likely welded on, and you will probably have to cut off it off to get started. Be sure to be cautious when removing your old latch, so you don't damage your trailer door in the process. If you're able to send some photos, I can give you a better idea about how to start removing the...
    view full answer...

  • Choosing Correct Polar Cam-Action Latch Kit for Enclosed Trailer
  • It sounds like you are referring to the Polar Cam-Action Latch Kits like # 383200 that are designated for small or large enclosed trailers. Your 12 x 6 enclosed trailer is likely considered a small trailer. With that being said, the differences in the kits just have to do with the size of the hardware used and there isn't really a reason you couldn't use a kit designed for a large trailer on doors that are on a small trailer (and vise versa). The weight capacities will be the same. For...
    view full answer...

  • Stainless Steel Heavy Duty Spring Latch with 3/8" Diameter Pin
  • We have exactly what you are looking for with 2 different styles. The Paneloc 2" long x 1-1/8" wide Heavy Duty Spring Latch Left Hand # F719-282U and Right Hand # F719-272U as well as the 4" long x 1-3/4" wide Left Hand # F718-282U002 and Right Hand # F718-272U002. Both styles use a 3/8" diameter pin. Attached are a few review videos for you to check out.
    view full answer...

  • Hardware Needed for 36" Lock Side-Door Bar Lock Assembly 305736
  • To install the 36" Lock Side-Door Bar Lock Assembly # 305736 you will need 5/16 inch diameter carriage bolts to secure the latch to the trailer with nuts and washers. You can find these carriage bolts at your local hardware store.
    view full answer...

  • Does Pipe Get Welded to Cams on Universal Cam-Door Lock for Enclosed Trailers
  • The cams for the end of the pipe for cam-door lock # 383200 basically are compression fit into the end of the pipe you use (not included). They can be tacked if need be but welding is not required.
    view full answer...

  • Is Handle of 45" Long Side-Door Bar Lock Assembly # PLR3057-45 Centered on Bar
  • The handle of the 45" Long Side-Door Bar Lock Assembly # PLR3057-45 is centered on the bar so yes it's 22-1/2 inch on either side.
    view full answer...