Replacement Bearings Races and Seals for a 1974 Midwest Boat Trailer
Updated 07/11/2012 | Published 07/09/2012 >
Products Featured in This Question
Question:
I have a 1974 Midwest boat trailer it is a single axle. I would like to change the wheel bearings both inner and outer with the races and seals. I have them removed and can not find any numbers on the bearings or races. The inner bearings are 1.25 inch ID the inner race is 2.30 OD. The outer bearings are .750 ID the race is 1.781 OD the outer race has a partial number LM 010 the first 0 may not be correct.
asked by: Jim W
Expert Reply:
Based on the measurements that you have provided, check out the outer bearing # LM11949 and race # LM11910. This bearing and race combinations has an inner diameter of .750 inches and an outer diameter of 1.781 inches.
For the inner bearing and race you will need bearing # LM67048 and race # LM67010. The inner diameter for this bearing and race combination is 1.250 inches and the outer diameter for race # LM67010 is 2.328 inches. We do not have a race with an OD of 2.30.
The grease seals that are compatible with inner bearing # LM67048 are the 10-10 grease seals # RG06-090. These seals have an inner diameter of 2.125 inches and an outer diameter of 3.376 inches. I have attached a link for each of the products that I have mentioned for you to check out.
Product Page this Question was Asked From
Replacement Race LM11910 for Bearing LM11949 - Qty 1
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.78 Inch O.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Continue Researching
- Video: A Closer Look at the Double Lip Grease Seals (pair)
- Shop: Replacement Trailer Wheel Bearing Kit - BT8 Spindle, Bearings L44643, Races L44610, Seal 34823
- Shop: Grease Seals - Double Lip - I.D. 1.250" / O.D. 1.983" for 2,000-lb Axles - Qty 2
- Q&A: Trailer Grease Seal Recommendation for Replacement of Victor 47376
- Search Results: hitch
- Q&A: Looking For Replacement For Hub Seal Victor 47445
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K and 4.4K Axles - Qty 2
- Shop: Grease Seal - Double Lip - I.D. 1.249" / O.D. 1.983" - 2,000-lb to 2,200-lb Axles - Qty 1
- Q&A: Recommended Idler Hub Assembly for 1-1/16 Inch Diameter Spindle With Seal 1-1/4 Inches at Spindle
- Shop: Transmission Cooler
- Shop: Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Q&A: Is a Transmission Cooler Required for a 2016 Honda Odyssey to Tow a 1,600 lb Pop-up Camper
- Shop: Trailer Hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Search Results: trailer jack
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)

