Looking For Replacement For Hub Seal Victor 47445

Updated 12/16/2025 | Published 12/15/2025

Question:

Looking for a trailer hub seal, Victor 47445. Do you carry a replacement? Or bearing/seal kit?

asked by: James P

Expert Reply:

Hey James, thanks for reaching out. We may have a suitable replacement for that, but I looked everywhere online and I could not find a widely published dimension chart or full spec sheet you can pull up online using that number alone. The only reliable way to identify its specs will be for you to measure the old seal’s inner diameter, outer diameter, and width. If you can get me those measurements I am happy to look into it and see if we have a replacement.

expert reply by: Jesse M

James P.

12/15/2025

Looks like ID 1.25" X OD 1 31/32", Just shy of 2". Double lip seal. Hopefully that helps.

Jesse M.

12/15/2025

@JamesP Perfect yes that helps a lot! That sounds like a standard size which is ID 1.249" / OD 1.983". To replace that you can use the following: - Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1 # 34823

Tim

12/16/2025

The grease seals I used work perfectly for my application. Etrailers set me up with what I needed. I don't know the part numbers they sent me right but they did a great job so sending the correct seals and electric brakes for my trailer.

Jesse M.

12/16/2025

@Tim Hey Tim! Thanks for sharing! Glad we were able to help you find exactly what you needed. You know where to find us if you ever need anything else!