Can I Add a 7 Way Connector to my 2019 Ford Ranger without the Tow Package 4 Way Connector?

Question

Question:

I have a 2019 ford ranger that already has a 4 pin connector will this work for me? I didn’t get the factory tow package. Trim is xl with stx package and I have backup sensors.

asked by: Nick B

0

Expert Reply:

I have a solution for you, but because your 2019 Ford Ranger did not come equipped with the factory tow package, the Tekonsha T-One # 22124 won't work on your vehicle. Instead you need the Universal Installation Kit # ETBC7 which will use the 4 way connector that has been installed and add a 7 way using that plug.

This kit comes with all of the wiring and hardware you'll need to install the 7 way on the back of your vehicle. This harness will allow you to neatly mount the connector below your back bumper and keep your 4 way connector active to use as well.

expert reply by: Erik B

0

Answer 1

I would be happy to help you get set up to tow your trailer with brakes. Starting with a hitch I recommend the etrailer Trailer Hitch Receiver #e63ZR. This is a custom fit Class III hitch with a 2" receiver. It has a maximum gross trailer weight…

view full answer...

Answer 2

The Tekonsha #22124 wiring harness would plug inline at the point where your exisitng 4-pole plugs into the factory harness. Once installed, you will have a functional 7-way, and will still retain a functional 4-pole. If the trailer you're…

view full answer...

Answer 3

Clive, realistically there is no difference between the Curt T-Connector #C56431 and the Tekonsha T-One #22124. The only real difference is one is made by Tekonsha and one is made by Curt. The Curt also does come with Zip ties and a protective cover…

view full answer...

Answer 4

The Tekonsha wiring harness item #22124 for your 2021 Ford Ranger XLT uses a power lead because they feel like it's needed but the Curt harness item #C56431 will work just fine and eliminates that extra step during installation. I recommend using…

view full answer...

Answer 5

Yes, it will. The Curt T-Connector Vehicle Wiring Harness item #C56431 is confirmed to fit all models of the 2023 Ford Ranger with or without the factory tow package. This custom-fit T-connector plugs into your Ranger's wiring harness, which is…

view full answer...

Answer 6

Yes, there is a plug in style wiring option for your 2022 Ford Ranger without tow package to provide a 7-way trailer connector. - T-One Vehicle Wiring Harness #22124 This custom-fit T-One connector plugs into your vehicle's wiring harness, which…

view full answer...

Answer 7

The etrailer Trailer Hitch Receiver #e63ZR that fits your 2022 Ford Ranger has a maximum towing capacity of 6,000lbs without a weight distribution hitch and 8,000lbs with a weight distribution hitch. I do recommend contacting your Ford dealer with…

view full answer...

Answer 8

It sounds like you might be looking for parts needed to tow a trailer with a 2019 Ford Ranger without factory tow package. If that is the case then you'd first need to start with a trailer hitch, the Curt Trailer Hitch Receiver part #C13417 is an…

view full answer...

Answer 9

The auxiliary 12-volt wire that runs from the 7-way connection to 7-way trailer plug will supply 12-volt power from the vehicle to the trailer. The 12 -volt power will allow interior or exterior lights to run that are not wired in to the…

view full answer...

Answer 10

If your 2022 Ford Ranger has the factory tow package then you'll just need the T-One Vehicle Wiring Harness with 7-Way Trailer Connector #22124. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located…

view full answer...

Answer 11

To use the Curt Echo Wireless Trailer Brake Controller #C51180 on your 2019 Ford Ranger with a factory 4-way connector you will need to install the Tekonsha 7-way connector #22124. This connector includes a harness custom made for your vehicle and…

view full answer...

Answer 12

The Tekonsha #118325 won't fit the 2021 Ranger. Instead, you'd need to use part #22124 if your truck isn't equipped with the factory 7-way connector. You can then use either an adapter like #47345 or a T-harness like part #118384 which…

view full answer...

Can I Add a 7 Way Connector to my 2019 Ford Ranger without the Tow Package 4 Way Connector?

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching