Tekonsha Wiring Harness Compatibility With Wireless Brake Controller On a 2020 Ford Ranger

Question

Question:

Can this be paired with a wireless controller

asked by: Chad S

0

Expert Reply:

Yes, the Tekonsha T-One Vehicle Wiring Harness # 22124 can be paired with a wireless brake controller such as the Curt Echo # C51180.

Your 2020 Ford Ranger will have to have the factory tow package and you will need to run the additional wire to the battery in your engine compartment for the 7-way to fully function.

expert reply by: Bud M

0

Answer 1

The T-One Vehicle Wiring Harness #22124 for your 2019 Ford Ranger does include the wiring needed to attach a 12volt charge line. I have linked the installation instructions below so you can see what is required if you wish to install it yourself.

view full answer...

Answer 2

The best hitch for your 2019 Ford Ranger is going to be the Curt Trailer Hitch Receiver item #C13417. This hitch is custom fit and bolts to your Ranger with included hardware. This is a class III hitch with a 2" receiver. It has a 6,000 lbs…

view full answer...

Answer 3

To use the Curt Echo Wireless Trailer Brake Controller #C51180 on your 2019 Ford Ranger with a factory 4-way connector you will need to install the Tekonsha 7-way connector #22124. This connector includes a harness custom made for your vehicle and…

view full answer...

Answer 4

Clive, realistically there is no difference between the Curt T-Connector #C56431 and the Tekonsha T-One #22124. The only real difference is one is made by Tekonsha and one is made by Curt. The Curt also does come with Zip ties and a protective cover…

view full answer...

Answer 5

In the 7-way trailer wiring kit part #C56431 install video you mentioned the brake controller that is seen is the Curt Echo Mobile part #C51180 which is a wireless phone controlled brake controller. The other option we have is the Tekonsha 7-way part…

view full answer...

Answer 6

The etrailer Trailer Hitch Receiver #e63ZR that fits your 2022 Ford Ranger has a maximum towing capacity of 6,000lbs without a weight distribution hitch and 8,000lbs with a weight distribution hitch. I do recommend contacting your Ford dealer with…

view full answer...

Answer 7

In order to tow a trailer with a 2021 Ford Ranger you'd need a trailer hitch, trailer wiring harness, and ball mount/hitch ball. If the trailer has brakes you'd also need a brake controller. It's not advised to pull with the bumper (if…

view full answer...

Answer 8

If your 2022 Ford Ranger has the factory tow package then you'll just need the T-One Vehicle Wiring Harness with 7-Way Trailer Connector #22124. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located…

view full answer...

Answer 9

The Tekonsha wiring harness item #22124 for your 2021 Ford Ranger XLT uses a power lead because they feel like it's needed but the Curt harness item #C56431 will work just fine and eliminates that extra step during installation. I recommend using…

view full answer...

Answer 10

I would be happy to help you get set up to tow your trailer with brakes. Starting with a hitch I recommend the etrailer Trailer Hitch Receiver #e63ZR. This is a custom fit Class III hitch with a 2" receiver. It has a maximum gross trailer weight…

view full answer...

Answer 11

Yes, there is a large difference in weight capacities between those hitch receivers for your 2021 Ford Ranger. I would be happy to break them down and compare them for you. The Curt Trailer Hitch Receiver item #C13417 is a custom fit for Ford Rangers…

view full answer...

Answer 12

The Tekonsha #22124 wiring harness would plug inline at the point where your exisitng 4-pole plugs into the factory harness. Once installed, you will have a functional 7-way, and will still retain a functional 4-pole. If the trailer you're…

view full answer...

Tekonsha Wiring Harness Compatibility With Wireless Brake Controller On a 2020 Ford Ranger

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching