Can Hub for 3,500 lb Axles be Used on Axles With Different Weight Rating
Updated 08/16/2019 | Published 08/15/2019
Products Featured in This Question
Question:
Hi. My enclosed trailer has a 2990 lb axle. I want to replace the hubs and you guys have exactly what I need as far as bearing size, etc. AKIHUB-545-35-PG-K but the weight rating is 3500 lb. Can I use the 3500 lb hubs on my 2990 axle?
asked by: Joey
Expert Reply:
That is a good question but the Trailer Idler Hub Assembly for 3,500-lb Axles # AKIHUB-545-35-K can absolutely be used on your axle rated for less than 3,000 lbs.
What matters is that you have the same # L68149 inner bearing, # L44649 outer bearing and # 58846 grease seal because this means the hub will fit your spindle. These are most often found on 3,500 lb axles but can be used on an axle with less capacity with no issues.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Spindle and Hub Replacement for Tie Down 3750 Torsion Axle
- Q&A: Velit VE49QV Roof Thickness Requirements and T@B Trailer Installation Guide
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: Let’s Check Out the CE Smith Bow Roller Assembly with Bells for 4" Wide Bracket
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: Slotted Swivel Bracket for Boat Trailers - Zinc Plated Steel - 3-1/2" Long - Qty 1
- Shop: Dexter Single Axle Standard Duty Suspension Kit - Double Eye Springs
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 4K Trailer Axles - 26" Long - Dacromet
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Post-Style Guide-Ons for Boat Trailers - 40" Tall - White - 1 Pair
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: How to Determine Tire/Wheel Diameter
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Tips for Determining Square Trailer Axle Capacity
- Q&A: Is It Required The Spring Seat Be Welded to Trailer Axle
- Q&A: Replacing Slipper Springs Incorrectly Installed on 18' Boat Trailer With Double Eye Leaf Springs
- Q&A: Are Trailer Spring Seats Needed for Square Axles with Leaf Springs?
- Search Results: axle
- Search Results: tja~5000t~b
- Search Results: 3500lb axle
- Search Results: spring seat
- Search Results: trailer axle
- Search Results: #84 spindle
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Video: Feature Breakdown: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle
- Video: Complete Breakdown of the Dexter Trailer Axle Beam with E-Z Lube Spindles
- Video: All You Need to Know About the CE Smith Bow Roller Assembly with Bells for 3" Wide Bracket
- Video: Review of the Trailer Axle Beam with Easy Grease Spindles