Replacing Fan Motor on Trailer Vent with MA10-20270

Question

Question:

My fan has the tiny screw on the post to take the fan blades off. Is it a philips head screw or is it an Allen wrench?

asked by: Sonya H

0

Expert Reply:

I checked with the manufacturer and the tiny screw you're seeing is a set screw. You will use an Allen wrench/key to remove this. I'm attaching a picture with a set of installation instructions for you to refer to when you're replacing the MaxxFan Lift Motor # MA10-20270 . We don't have the new/updated instructions available, but where it refers to a nut holding the blades on to the motor shaft, this is now a set screw like you're seeing. All of the other steps will remain the same.

expert reply by: Erik B

0

click to enlarge

Answer 1

The two most likely causes of a MaxxAir vent fan lid not opening or closing are either going to be a lift motor or operator failure. I recommend removing the motor and applying power directly to this to see if the shaft turns. If not, you know the…

view full answer...

Answer 2

Hi Michael, since the issue started after replacing the circuit board, I'd first verify that the new board is the correct one for your 4751KS and that all connectors were installed in the proper locations. Since the lid moves freely by hand and…

view full answer...

Answer 3

Great questions I am glad you asked them. I have solutions for them. You will need the Demco SBS Second Vehicle Kit for Air Force One Supplemental Braking System #SM99209 and the Demco SBS Air Force One Coiled Air Jumper Kit for 2019 to Present…

view full answer...

Answer 4

Since it can manually be operated that would indicate that it's not the operator mechanism and is instead the lift motor that needs to be replaced. We offer this with the part #MA10-20270.

view full answer...

Answer 5

You reported that you cannot use the remote on your MaxxFan 4700K to put the vent cover up and down. Let's troubleshoot. Put some new batteries in your remote. Ensure that the display comes on. Verify if your vent cover now works. Verify if other…

view full answer...

Answer 6

The model number for fans such as the MaxxAir MaxxFan Mini Roof Vent, #MA00-04401M is listed on the upper side of the assembly itself. Please see the attached image. You will best identify this by opening the vent and climbing on top of the RV.…

view full answer...

Answer 7

Hey, Mark! The MouseBlocker PROx part #MB94FR would be the best for your RV. It's the hardwire in options but this will be the best option because it will give you the availability to mount and put anywhere you can wire it into. Now these are…

view full answer...

Answer 8

Hey Roy, welcome back! The mounting hardware available for the Batwing Awnings attaches to crossbars or platform racks. I don't have a way to attach a Batwing awning directly to the side or top of your Popup camper and Rhino-Rack doesn't…

view full answer...

Answer 9

Hey Cecil. The Dexter E-Z Flex Suspension Kit item #K71-653-00 includes a set of shackle straps that measure 2-1/4" on center. They're going to be 3/8" shorter than what you currently have on your trailer, which is not going to be an…

view full answer...

Answer 10

Hi Marcus! The Taskmaster Modular Wheel w/ +0.08 Offset - 17-1/2" x 6-3/4" Rim - 8 on 6-1/2 - Silver #TA35ZR weighs a hair over 51 pounds. Pretty heavy, but it is a pretty heavy duty wheel. Do you already have a tire picked out for this? It…

view full answer...

Answer 11

Thank you for your question, Tim. Thank you for the information you've shared. To find the correct parts, I will need the length of your current equalizer measured from the center of one bolt hole to the center of the other. When replacing…

view full answer...

Answer 12

Hey William, we've got you covered! Excellent choice to improve ride quality, my favorite thing about the Firestone Ride-Rite Air Bags #F79XV is the wireless control lets you adjust everything right from your phone. The link will take you to our…

view full answer...

Replacing Fan Motor on Trailer Vent with MA10-20270

Product Page this Question was Asked From

Continue Researching