Replacement Equalizer and Wet Bolt Kit w/ 2-1/4" Shackle Straps for a 13-144 Equalizer

Updated 08/29/2026 | Published 08/11/2026

Products Featured in This Question

Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs

(643)

$449.82

Replacement Dexter Triple-Axle Trailer E-Z Flex Equalizer for 1-3/4" Wide Double-Eye Springs

(50)

$148.59

MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps

(2322)

$148.62

Question:

Need help getting the right suspension parts for my 2014 Heartland RW305 Toyhauler 5th W. Broke a shackle a few days ago. Has 13-144 equalizer with rubber maybe starting to crack? 28k miles on trailer so Im thinking I should replace those along w HD brackets. 35In axle 7k spacing. 2 1/4 maybe 2 1/2in shackles. It also has the LCI Correct system on the spring ends. Not sure what I need. Option 1 Morryde Upgrade kit w 2 1/4 shackles and Dexter EZ Flex 013-144-03 does this pn come with 2. Or Option 2 K71-653-00 system? Thanks!!

asked by: John B

Expert Reply:

Thanks for the information John! To replace your 13-144 equalizers, I recommend the Dexter E-Z Flex Suspension Kit item # K71-653-00. Aside from the cracked rubber these will be identical equalizers to your current ones.

The Dexter E-Z Flex Suspension Kit item # K71-653-00 also includes heavy duty 2-1/4" long shackle straps, wet bolts, and bronze bushings. This kit does work with the LCI Correct Track system. so you won't have to worry about any compatibility issues.

The Replacement Dexter Triple-Axle Trailer E-Z Flex Equalizer item # 013-144-03 you mentioned is a single equalizer and it's the same one included with the Dexter E-Z Flex Suspension Kit item # K71-653-00.

The MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps item # MR58ZR is a great option and they're extremely reliable. I still recommend going with the Dexter E-Z Flex Suspension Kit item # K71-653-00 because it comes with everything you need.

What do you typically haul in your Toy Hauler's garage? Feel free to answer this and throw in any other questions you have, where it says Add Comment.

expert reply by: Jerred H

K71-653-00
(click to enlarge)

Kurt F.

8/18/2026

I did the Dexter E-Z Flex on our travel trailer (GD Imagine XLS 22MLE) several years ago, and as @Jerred H noted, it's a complete kit with a full set of thick shackle straps, bronze bushings & wet bolts. Plenty of "how to" installation videos out there, but my only guidance beyond what you'll see there is to do it on a level lot. My driveway has some slope to it, and it was a PITA manipulating various jacks to get the leaf spring end holes to line up correctly so you could get the new wet bolts in. Beyond that note, the rest is just wrench work and a little (lot of) banging to get the old bolts out and the new ones in. Good luck!

Jerred H.

8/20/2026

@KurtF That's a great tip Kurt! Thanks for coming back and sharing that.

John B.

8/25/2026

Thanks Jarred! Product installed as it should. You definitely need 2 jacks, impact wrench and other tools. The hydraulic lifts on the toyhauler definitely make it easier to raise camper for assembly. The only issue I had was that my camper had Correct Track installed with the bolts welded to the adjusting plates. I reused the existing bolts w grease. I will order longer bolts and install these in the neaer future. I haul motorcycles or a small RZR depending on destination. Thanks again. John

Jerred H.

8/27/2026

@JohnB You're welcome John! Glad you used a couple of jacks. Those hydraulic levelers aren't recommended to be used in place of them. Did you purchase your Toy Hauler used? I've never heard of them welding the correct trac brackets to the suspension bolts. The 9/16" x 3-3/8" item # MR52HR is the correct bolt you'll need.

Johnb

8/29/2026

Purchased brand new in 2014. Bolts were spot welded to hold them in place. I have MR52HR bolts on the way ( thanks for the pn ) and can easily grind the spot welds to install the new bolts. Yea...the hydraulic levelers come in SO handy to raise the trailer for service but I definitely use sturdy jack stands under the unit for safety.

Jerred H.

8/29/2026

@Johnb You're welcome! That's really interesting on the spot weld. Like you said it shouldn't take much to pop those welds off.