Replacement Landing Gear Set for a 1991 Avalon 5th Wheel Trailer
Updated 05/30/2019 | Published 05/28/2019
Products Featured in This Question
Question:
Need landing gear Assy. For 1991 avalon 35.5 b
asked by: Ben R
Expert Reply:
To choose the correct replacement landing gear set you simply need to determine the spacing between the weld stops on your current landing gear set. The standard measurement is 15-1/2" inside to inside or 17-1/2" outside to outside. For this measurement I recommend the Landing Gear Set # RVLG-8000 because it gives you 36-1/2" of lift and is rated for 8,000 lbs. For this you can either use the manual hand crank # RVLG-HDL or the 12V DC Motor # M1230 and Switch # LG-145236 for operation.
If you happen to have a different measurement like 14-1/2" or 20-1/4" then you need the Ultra-Fab # UF17-943010 instead. This is an electric landing gear set that is rated for 12,000 lbs and can be adjusted individually via the toggle switches.
I have attached dimensional photos for both options that you can reference.
Product Page this Question was Asked From
Landing Gear Set - 36-1/2" Lift - 8,000 lbs
- Camper Jacks
- 5th Wheel Camper
- Landing Gear
- Steel
- 7001 - 8000 lbs
- Manual Jack
- 36 Inch Lift
- Weld-On
- 2 Jacks
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs
- Shop: Landing Gear Set - 36-1/2" Lift - 8,000 lbs
- Shop: Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs - Qty 1
- Shop: Replacement 5th Wheel RV Landing Gear Follow Leg w/ Snap Pin for RVs
- Q&A: Low Profile Landing Gear For 2010 Jayco Eagle 5th Wheel Trailer
- Q&A: Determining The Correct Replacement landing Gear Set For A 1995 Fleetwood Terry 5th Wheel Trailer
- Q&A: Replacement Landing Gear for a 1996 Sea Breeze 5th Wheel Trailer
- Q&A: Recommended Landing Gear Replacement Based on Weld Stop Location for Bracket Compatibility
- Shop: Lippert Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear
- Q&A: Can The Gearbox For The etrailer Landing Gear Set Be Mounted Horizontally
- Q&A: Bracket Dimensions of the etrailer RV Landing Gear System # RVLG-8HDL
- Shop: Replacement Drop Leg with Foot for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs
- Q&A: Replacement Follow Landing Gear Leg for 1998 Fleetwood Savanna 5th Wheel
- Video: All You Need to Know About the Landing Gear Set
- Search Results: landing gear trailer jack
- Shop: Empire Faucets RV Kitchen Faucet - Dual Teacup Handle - Brushed Nickel
- Video: Feature Review Replacement Follow Leg for Stromberg Carlson Landing Gear
- Shop: Trailer Hitch
- Video: Fifth Wheel Towing Made Simple with Daniel
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer jack
- Search Results: trailer tires and wheels
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer wiring
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
on Camper Jacks
