Recommended Landing Gear Replacement Based on Weld Stop Location for Bracket Compatibility
Updated 09/10/2018 | Published 09/08/2018
Products Featured in This Question
Question:
replacing a follow landing gear can only find 29 1/2 in mine measures 33in will the 29 1/2 work
asked by: Eddie P
Expert Reply:
The bracket spacing between weld stops on your landing gear legs will be the determining factory for your replacement follow leg. There are two standard sizes for the weld stops; 33-1/2 inch legs have weld stop spacing of 19-1/2 and 21-1/2 inches whereas the shorter legs are 15-1/2 and 17-1/2 inches.
If you need the longer weld stop spacing, I recommend the Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2" # LG-177201. For matching lead leg, you may want # LG-177202.
If you have the more common 17-1/2 inch spacing, I recommend the Replacement Follow Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2" # LG-179014. You do want the legs to match so that you have the same thread size, so you may also want lead leg # LG-179013.
Product Page this Question was Asked From
Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2"
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Driver Leg
- Stromberg Carlson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs
- Shop: Landing Gear Set - 36-1/2" Lift - 8,000 lbs
- Q&A: Replacement Landing Gear Set for a 1991 Avalon 5th Wheel Trailer
- Shop: Replacement 5th Wheel RV Landing Gear Follow Leg w/ Snap Pin for RVs
- Shop: Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs - Qty 1
- Search Results: landing gear trailer jack
- Q&A: Determining The Correct Replacement landing Gear Set For A 1995 Fleetwood Terry 5th Wheel Trailer
- Q&A: Replacement Landing Gear for a 1996 Sea Breeze 5th Wheel Trailer
- Q&A: Will the Lippert Electric Landing Gear Set Fit a 1994 Terry 5th Wheel Trailer
- Shop: Fulton Square Drop Leg for Stabilizer Jack, 29" Long
- Shop: Fulton Drop-Leg Stabilizer Jack with Mounting Channel - Weld-On - 28" Leg - 13" Bracket -
- Shop: Replacement Drop Leg with Foot for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs
- Q&A: Bracket Dimensions of the etrailer RV Landing Gear System # RVLG-8HDL
- Q&A: Can The Gearbox For The etrailer Landing Gear Set Be Mounted Horizontally
- Q&A: Outside Leg Dimensions of etrailer.com Landing Gear for 1995 Skyline Layton Fifth Wheel
- Video: All You Need to Know About the Landing Gear Set
- Video: Comprehensive Review: Fulton Square Drop Leg for Stabilizer Jack, 29" Long
- Video: Feature Review Replacement Follow Leg for Stromberg Carlson Landing Gear