Will Trailer Idler Hub Assembly AKIHUB-545-2-G-2K Fit Shorelandr SLB-12TM Trailer
Updated 05/01/2019 | Published 04/29/2019
Products Featured in This Question
Question:
I have a Shorelandr SLB-12TM trailer. 56inch axle - part #64449. OEM Hub is part #4470337 - 1 1/6inch x 1 1/16, 5 bolt pattern. Can this be used as a replacement part for the OEM hub? OEM bearings are #4440160 which corresponds to Timken Set4 L44649. Thanks
asked by: Glenn
Expert Reply:
The etrailer.com 5-on-4-1/2 Trailer Idler Hub Assembly # AKIHUB-545-2-G-2K will fit your trailer spindles since it uses the same set of bearings ( # L44649 which are indeed equivalents to part 4440160) and the same seal as the OEM part. The hub's included # 10-9 seal has an inner diameter of 1.50-inches and an outer diameter of 1.987-inches to match the spindle diameter and hub bore diameter, respectively.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Can Boat Trailer With Shorelander Hub 4470337 go From 12 Inch to 13 Inch Tires & Wheels
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Shop: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 2K Trailer Axles - 20-3/8" Long - Dacromet
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring - 3,500-lb Trailer Axles - 27" Long - Dacromet
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles - 25-1/4" Long - Dacromet
- Search Results: leaf spring clamps
- Search Results: akihub~545~2~g~2k
- Search Results: trailer leaf springs
- Search Results: l44549
- Q&A: Are Bearings L44549 and L44649 Interchangeable
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
- Search Results: repair sleeve
- Search Results: btr spindle
- Search Results: castle nut
- Q&A: Trailer Hub Seal with Inner Diameter 1.375 and Outer Diameter 1.98 inches
- Q&A: Will Air Lift LoadLifter 5000 Air Helper Springs AL38FF Fit 2022 Ford Bronco With Sasquatch Package?
- Q&A: Recommended Replacement Hubs for a Tiedown 11029 Boat Trailer
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Looking for Replacement 5 Lug Hub with Bearings L44649 Pre Greased
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Tire Sizing
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Determine Tire/Wheel Diameter
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub