Search: l44549   >  

From the information that I was able to find on the L44549 bearing, it shows it being a 1-1/16 inch bearing which is the same as Trailer Hub Bearing, #L44649. Just to be sure, I recommend measuring the L44549 bearing with a digital caliper to confirm…

Bearings L44549 have a 1-1/16 inch inner diameter, which is the same as the 1.063 inch inner diameter of bearings #L44649. That means the assembly you referenced, #AKIHUB-440-2-G-2K, will work. It is designed for 2,000 lb axles with BTR spindles, has…

Hello David. All of the 2-1/4" or 2-1/2" long 9/16" wheel studs we offer have a knurl diameter of .68, such at the Kodiak Wheel Bolt #K916WB25. We do not have anything with a knurl size of .60 or .62. We do have some 1/2" studs…

You can check the condition of your hub's races by carefully removing all bearing grease with a rag to expose the actual surface of the races. When they are completely free of grease, etc., inspect them for any signs of scoring (very slight…

In order to find out what you need for a replacement actuator you will want to start by finding out what kind of brakes you have. A different brake actuator is needed if you have drum brakes or disc brakes. You will also want to choose a replacement…

You won't need to replace your trailer's drums or brakes unless they need replacing anyway. You can keep drum brakes with an electric over hydraulic system. What you will need is an EOH actuator, a breakaway kit, and an electric brake…

The exact replacement hub assemblies you need for your BD2-545-17 are the etrailer Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 #AKHD-545-35-K that you referenced.

From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter. The replacement double lip grease seals you…

To get the correct bearings and seal kit for your Long Chih trailer, you will want to get the part numbers that are stamped on the bearings of your trailer. There will be an inner and an outer bearing number. With those part numbers, I will be able…

I recommend using either of our Hydrastar Vented Marine Electric Over Hydraulic Actuators. We have a kit for Drum #HS481-8065 or Disc #HS481-8067 brakes. Both of these kits use plug and play connectors for the breakaway battery, trailer disconnect,…

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

The P-15 model information you provided for your Dexter axle does indicate its model, but you will still need to note its length and capacity before locating the correct replacement. If you are able to find a longer serial number somewhere on the…