Recommended Trailer Hitch Receiver and 2 Bike Rack for 2008 Ford Fusion with Rear Spoiler
Updated 04/17/2019 | Published 04/16/2019 >
Products Featured in This Question
Question:
I have a 2008 Ford Fusion with a rear spoiler bar which is part of the trunk of the car. I need to have a hitchinstalled that will allow me to affix a 2-bike bycicle hitch mount rack carrier. The shank size is 1 and 1/4 inch. Please advise where in the Buffalo, New York area I can have this hitch installed and would appreciate the specifications of the hitch that should be installed including the names of the recommended manufacturers. Much appreciate your information.
asked by: Richard D
Expert Reply:
For your 2008 Ford Fusion I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11329. This hitch is an easy installation that you can do or have any local mechanic you trust do for you. I've attached the installation details to assist.
The 1-1/4 inch hitch is decently recessed under the bumper of your vehicle, so I recommend the Thule EasyFold XT 2 Bike Platform Rack # TH903202. This bike rack will give you 8 inches from the center of the hitch pin hole to the closest part of the rack. This means it will have good bumper clearance. This rack comes with the locking anti-rattle pin.
You will not need any help from a shop to install this bike rack. It is an easy installation you can do. I've attached videos to assist.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- For Towing
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Q&A: Trailer Hitch and 4 Bike Carrying Recommendation for 2009 Lincoln MKZ
- Q&A: Safe Grease Gun Pressure for Filling Hubs with Grease on EZ Lube Spindles
- Q&A: Availability of Replacement 1.82 Inch Dust Cap for Older Trailer Hubs
- Q&A: How Do I Get a Slightly Bent Hitch Straightened Out So It Can Be Installed on 2019 Ram 1500 Classic
- Q&A: Aftermarket Puck Kit Recommendation for a 2022 Ford F-250 Super Duty
- Article: Trailer Wiring Diagrams
- Q&A: How to Find Replacement for TDE 11029C Hub Assembly
- Q&A: Recommended Titan BrakeRite To Replace Discontinued Titan BrakeRite II T4835700




