We'll connect you with nearby partnered installers who know this exact setup.

CURT

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Part Number: C11329

20 Reviews | 28 Questions

In Stock

$347.31

Retail:$492.95

You Save: $145.64

Not Confirmed to Fit

2022 Cadillac Escalade

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

curt trailer hitch receiver - custom fit class i 1-1/4 inch

curt trailer hitch for towing receiver - custom fit class i 1-1/4 inch

Show All (5) Product Images

Show Fewer Product Images

Customer Photos

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" customer photo

Show All (1) Customer Images

Show Fewer Customer Images

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C11329 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (20)
Q & A (0)
Related Parts
Photos

CURT Trailer Hitch - C11329

Highlights

Custom Fit for Your Vehicle: Mounts to existing attachment points
Tows up to 2,000 lbs (GTW): Handles small trailers and light-duty towing jobs safely
Holds up to 200 lbs (TW): Works with bike racks, cargo carriers, and Class I accessories
Bolt-On Installation: Mounts with standard tools using included hardware—no welding required
Durable Steel Build: Fully welded square-tube design for long-lasting strength
Gloss Black Finish: Powder coat over base layer protects against rust and wear

Features to know about

Add Utility for Bikes and Small Trailers: Class I 1-1/4" Receiver

When you want to carry a couple of bikes or tow a small trailer, this Curt trailer hitch receiver makes it easy. It’s rated for 2,000 lbs maximum gross trailer weight and 200 lbs tongue weight, giving you just the right strength for light towing or cargo carriers. With its sturdy square-tube design and concealed cross tube, it keeps a clean look while still being solid enough for everyday use.

Install It Yourself Without Welding: Custom-Fit Bolt-On Design

You don’t need to weld or make complicated modifications to get this hitch on your vehicle. The custom fit is designed specifically for the mounting points already built into the frame, and the included hardware kit means you can bolt it up with standard tools. Precision robotic welding helps everything line up where it should, so the install goes together smoothly in a driveway or garage.

Count on Strength That Lasts: Fully Welded Steel and Gloss Black Powder Coat

This hitch is built from fully welded steel for lasting durability. The gloss black powder coat finish sits over a protective base coat to fight off rust and corrosion from weather and road grime. You get a solid, heavy-duty feel that holds up trip after trip without looking rough under the bumper.

Ready for Everyday Towing Gear: Works with Common Ball Mounts and Accessories

Once installed, this 1-1/4" receiver is ready for typical towing setups. Drawbar, pin, and clip are sold separately, so you can match them to your trailer or bike rack setup. With its Class I receiver opening, it fits the most common light-duty towing accessories so you can haul what you need safely and securely.

Specs

Receiver Opening

Size: 1-1/4" x 1-1/4"

Weight and Capacity

Rating: Class I
Maximum gross trailer weight: 2,000 lbs
Maximum tongue weight: 200 lbs

Warranty

Limited lifetime warranty

11329 Curt Class 1 Trailer Hitch Receiver

Compare to Draw-Tite 24775

Installation Details C11329 Installation instructions

This Product Fits The Following Vehicles

2006 - 2008 Mazda 6 Sedan and 5 Door Hatchback
2006 - 2009 Ford Fusion
2006 - 2009 Mercury Milan
2007 - 2009 Lincoln MKZ
2006 - 2006 Lincoln Zephyr

Customer Satisfaction Score:

89% were satisfied with this product

11% of customers were not satisfied

Wrong item was ordered
Too difficult to install

11% of customers were not satisfied

Wrong item was ordered
Too difficult to install

4.7

20 reviews

5 Stars		(16)
4 Stars		(3)
3 Stars		(0)
2 Stars		(0)
1 Star		(1)

by: Allen 09/26/2026

2009 Ford Fusion

Hitch is well designed and only the receptacle for the draw bar shows below the rear valance of my 2009 Ford Fusion. I plan to use if for a small utility trailer or a cargo carrier with a light load, so it should work very well.

by: Velo F. 10/07/2020 One Year Later

Installation was a bit difficult because for some reason the steel in the bumper was pretty tough. The first screw to be threaded through with the little threading tool went well. The second one was more difficult because the spiral that engages into the screw threads was no longer perfect. If I had two of those threading gizmo's it would have gone easier for threading the bolt through the bumper. But I did get it on.

Once in place, I have to say that the fit was perfect. The hitch was right below the bumper and having had it on the car now for about two, maybe three months, I haven't scraped it yet. So, it is up high enough to stay out of the way when coming out of steep aprons.

I am happy with it and would buy this or one made by Curt again.

You may notice from the picture that I did have this hitch modified so that I could put a 2" receiver in. I know this doesn't automatically make it a class III, I just did it to keep my bike rack from swaying so much. It does work.

Click to Enlarge

by: Brennon 09/23/2021 One Year Later

the difficulty of your install will depend on your vehicle. I have extensive rust on my vehicle so it made it harder than it needed to be. the product and hardware from etrailer was good quality. No problems one year later. I'll be buying hitches from etrailer in the future

by: Jacob 08/30/2024 One Year Later

So far so good! Installation was pretty straightforward a few holes were a quarter inch out of alignment... But it wasn't bad... So far I only use this hitch to haul a 2X bike rack.

by: James 06/29/2018

2008 Ford Fusion

Well built hitch. The only thing I'll have to say is have "quality" drill bits if you are installing on a Fusion. The bumper steel must be harden to withstand a rear crash. I dulled 3 and broke 1. Other than that the install was very easy. I loved the fish wire that came with the pack. Don't think I could get the bolts to the hole from the side into the drilled holes if it was not for the fish wire. I am truly glad that I found etrailer on the web. They have my business.
Thanks

by: Craig 08/18/2020

2009 Ford Fusion

Very easy to install yourself if you have the tools(drill, and several different sized bits). I’ve never installed a hitch before, but I watched the video, and followed the instructions. Took me 65 minutes from start to finish, including clean up. My Kuat Sherpa slid right in and isn’t going anywhere lol.

by: Mark 08/08/2018

2008 Mercury Milan

Very prominent shipping and of course a very nice hitch. Curt's make hitches better today than the other 2 did years ago when they were also made here.
Great hitch go USA

by: Morris 03/26/2020

Very sturdy well built hitch, one problem though is interference with spare tire wheel well. Otherwise great product, fishing line was genius.

by: Ben 04/26/2024

Most importantly the hitch fit our vehicle as promised. The receiver is high quality with strong welds and a nice paint job. I haven't had to use it much yet but is ready!

by: Only used it a few times but so far is great 09/15/2019 One Year Later

2006 Mazda 6

Live in dry hot climate and use it to toe a kayak with a small car. Install was easy enough. Fits well. Works as expected.

Best thing I recall was my customer service experience with the company. They went above & beyond what I consider average. They went to extra mile to make my shopping experience easy.

by: John 06/26/2023 One Year Later

The kit was put together well, including the alignment of the welds. It include all necessary hardware and has been working well for a year now.

by: Laverne 06/17/2020

Solid construction. Perfect fit. Works perfect. I am very happy with customer service and support.

by: Keith 08/15/2022 One Year Later

It took a long time to receive the hitch and I didn’t immediately mount it to the car. When I did try to mount it I found that it was bent and I have not attempted to bend it back to the correct shape which I think is difficult as it is a compound bend. I thought as the car is older (2007 Mercury Milan 6 cylinder/dual exhaust) , it was difficult to source and I thought I could fit it. I still have the original box and all the parts if you are interested in exchanging it.

Brooke M.

8/24/2022

Thanks for reaching back out. I am sending this to our customer service team and they will be in touch with you soon.

by: Terry V. 10/19/2015

Unit was easy to install, was very happy with quality. Will definitely will order in future on next project.

by: Art 11/11/2021 One Year Later

Easy to install
No issues

by: Dave 05/26/2024

Very solidly built, fairly easy to install, took some adapting to my car frame.

by: Pat 09/17/2022

by: Daniel 08/14/2023

by: Peter 05/31/2023

by: Ed 05/08/2021

true

See what our Experts say about this CURT Trailer Hitch

Do you have a question about this Trailer Hitch?

Pulling Installation Bolts Through the Frame when Installing Trailer Hitch on a 2008 Ford Fusion
When installing a hitch that requires drilling on your 2008 Ford Fusion, like the Curt Trailer Hitch Receiver - Custom Fit # C11329, you will need to use a little extra force to pull the bolts through the hole that you drilled. When I first started here, I helped out installing a trailer hitch on a vehicle and I had the same thought that you did. I quickly found out that if you have enough of the wire threaded on the bolt, you can actually give it a good yank and it will stay on the bolt. Worst...
view full answer...
Recommended Trailer Hitch Receiver and 2 Bike Rack for 2008 Ford Fusion with Rear Spoiler
For your 2008 Ford Fusion I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11329. This hitch is an easy installation that you can do or have any local mechanic you trust do for you. I've attached the installation details to assist. The 1-1/4 inch hitch is decently recessed under the bumper of your vehicle, so I recommend the Thule EasyFold XT 2 Bike Platform Rack # TH903202. This bike rack will give you 8 inches from the center of the hitch pin hole to...
view full answer...
Tips for Installing Curt 1-1/4 Trailer Hitch C11329 on a 2007 Mazda 6 Sport Wagon
You should be able to just pop out the two rubber plugs in the trunk pan of your 2007 Mazda 6 Sport Wagon, using a flat head screwdriver or trim removal tool. The Curt model # C11329 does not require you to lower your exhaust to complete the installation, as the entire hitch assembly runs along the center of the vehicle, between the exhaust. Once you have popped out the two plugs, move straight back from these holes, staying in the center of the vehicle. Once you reach the inner bumper...
view full answer...
Trailer Hitch that Fits 2009 Ford Fusion
We have the Curt trailer hitch # C11329 for the 2009 Ford Fusion that has a towing capacity of 2,000 lbs. This capacity though is independent of the capacity of your vehicle. I tried looking up the capacity for it online and most places say it wasn't listed or it's not rated for any towing. So I really wouldn't feel comfortable telling you that your vehicle could tow a 1,500 lb trailer. Especially on the hills you describe. If you really wanted to do it though I would recommend checking...
view full answer...
Differences in Trailer Hitch Installation Between a 2008 and 2009 Ford Fusion
The 2008 and 2009 Ford Fusions are from the same generation meaning that as far as installing a trailer hitch goes, the steps and attachment points are going to be the same. The Curt hitch # C11329 will fit both the 2008 and 2009 models of the Ford Fusions. I have included a link to the installation details for Curt Hitch Trailer Hitch, # C11329, below for reference.
view full answer...
Can a 2009 Lincoln MKZ Pull a Pop-Up Camper
In order to tow a trailer with a 2009 Lincoln MKZ you'll need a trailer hitch, trailer wiring harness, and ball mount/hitch ball. I will attach a list below with each of these options. In regards to capacity and compatibility, you'll have to refer to your copy of the owner's manual for this which should be located in the glove box. We cannot recommend deviating from the manufactures instructions. Curt Trailer Hitch Receiver part # C11329 Hopkins Plug-In Simple Vehicle Wiring Harness with...
view full answer...
Can the Foot-Activated Liftgate Still Work with Trailer Hitch Installed on a 2015 Ford Edge
I recommend going with the Draw-Tite Trailer Hitch # 75234 for your 2015 Ford Edge. This is a Class III trailer hitch with a 2" receiver that will not prohibit the use of your foot-activated tailgate although you may have to kick straight out in a different spot than you do now (see attached picture). If you let me know what you will be using this hitch for I can make additional recommendations if necessary. As far as towing with your 2008 Ford Fusion is concerned, I took a look at the...
view full answer...
Trailer Hitch and Wiring for a 2006 Ford Fusion
That was a nice gift but Hidden hitch trailer hitch 60282 will not fit a 2006 Ford Fusion. It used to fit 2010 to 2012 Fusions, 2010 and 2011 Mercury Milans, and 2010 to 2012 Lincoln MKZs. But that hitch is now discontinued. The comparable trailer hitch for the 2006 Ford Fusion is the Curt # C11329. If you plan on doing some towing the correct ball mount is # 3592. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # 118422. I have linked a video...
view full answer...
Hitch and Roof Cargo Carrying Options for 2008 Lincoln MKZ
Good for you for checking out your car's capabilities before you use it to tow. Not everyone does that! Lincoln includes the following statement on page 176 of their online owner's manual for your 2008 MKZ: "Never tow a trailer with this vehicle. Your vehicle is not equipped to tow." All is not lost, as there are still several ways to transport your cargo items on the MKZ; it just won't be with a trailer. If you were to install Curt Class I hitch # C11329 on the MKZ you could use a Class...
view full answer...
Can a 2008 Mercury Milan With Class I Hitch Tow a 16 Foot Tracker Boat
It sounds like you have a Class I hitch like the Curt Trailer Hitch Receiver # C11329 on your 2008 Mercury Milan. A Class I hitch like this will have a maximum gross trailer weight of 2,000 lbs and tongue weight of 200 lbs. You will also need to know the towing capacity of your vehicle and will be limited by whichever is lower. Assuming the weight of your boat and boat trailer do not exceed the capacity of your vehicle or hitch, you will be able to tow it.
view full answer...
Swapping Hitch Between Different Generations of Same Vehicle
The Draw-Tite Class I hitch you referred to, part # 24865 is a fit for the 2010-2012 Ford Fusion, 2010-2011 Mercury Milan and the 2010-2012 Lincoln MKZ only. It won't fit your 2006 Fusion. For the 2006, you'd want the Curt # C11329. If you look at both hitches, as well as their installation procedure, you can see that the two hitches are quite different. I've linked you to install instructions and videos for both hitches. Even if the same hitch fit both vehicles, the hitch hardware is...
view full answer...
Hitch & Bike Rack Recommendation For 2008 Ford Fusion
The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11329 is the correct hitch for your 2008 Ford Fusion. However, if cost is your primary concern and the only thing, you're looking to haul are bicycles, you might consider a trunk mounted bike rack instead, which could cost about half as much as the hitch. The Hollywood Racks Express 3Bike Rack # HRE3 is a fine product that will meet that specific need. If you're interested in a hitch bike rack, you first need to know that...
view full answer...
Trailer Hitch Recommendation for a 2006 Lincoln Zephyr
At this time there is not a Class III, or larger 2 inch receiver hitch available for your 2006 Lincoln Zephyr. I have included a link to the available hitches for you. The most popular option is the Curt hitch, # C11329. To look at the installation instructions, click the provided link. I have listed some items you may need to complete your towing setup. Drawbar # 3592 Hitch Ball # 19256 or # 19258 Hitch Lock # e98879 Pin and Clip # PC2 Wiring # 119176KIT
view full answer...
Hitch Comparison and Recommendation for a 2008 Ford Fusion
The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11329 is absolutely the correct hitch for your 2009 Ford Fusion! In case you don't have a ball mount yet you would also want the part # 3592, and then for a 2 inch ball # 19258 and for a 1-7/8 inch ball # 19256. For trailer wiring you would want the part # 118422.
view full answer...
Enclosed Cargo Carrier And Trailer Hitch For A 2008 Lincoln MKZ
To be able to use the 23x47 Carpod Walled Cargo Carrier w/ Lid # M2205-2201 with your 2008 Lincoln MKZ, you'll first need a trailer hitch like the Curt Trailer Hitch Receiver # C11329. This trailer hitch is a class I trailer hitch with a maximum towing capacity of 2,000lbs, and has a maximum tongue weight capacity of 200lbs. Since # M2205-2201 is designed to work in 2" x 2" trailer hitch receivers, you'll need to use the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver # HTAD. This will...
view full answer...
Comparing the Curt and Draw Tite Hitches for a 2009 Ford Fusion
We have the Curt # C11329for your 2009 Ford Fusion. Curt also requires a stabilizer strap like part # 18050 for unsupported loads like bike racks or cargo carriers.
view full answer...
Trailer Hitch and 4 Bike Carrying Recommendation for 2009 Lincoln MKZ
The Curt # C11329 is indeed a fit for your 2009 Lincoln MKZ. This would work great for you. You can use an adapter like # HTAD, but there's 2 problems with doing that. Both the hitch and bike rack manufacturers state that no more than 2 bikes should be carried in a bike rack used in a Class I hitch. Adding a 3rd and 4th bike moves too much weight too far away from the hitch receiver tube which can apply enough leverage to damage the hitch or cause the attachment points to the vehicle...
view full answer...
Will the Curt Trailer Hitch, # C11308, Fit a 2007 Mazda 6 Hatchback And Wagon
The Curt Trailer Hitch, item # C11308, will fit the 2007 Mazda 6 Sport Wagon models only. For the 2007 Mazda 6 five door hatch back, and the 4 door sedan, you would need to use the Curt Trailer Hitch, item # C11329. Some items you may need to complete your Class I towing setup are listed below. Wiring, item # C59496, for the 2007 Mazda 6 Sport Wagon Wiring, item # 118405, for the Mazda 6 4 Door Sedan and 5 Door Hatchback Drawbar, item # 3593, for the 2007 Mazda 6 Sport Wagon Drawbar,...
view full answer...
Is There a 2 Trailer Hitch Available for a 2009 Ford Fusion
I do have an option for you, but they do not make a 2" trailer hitch receiver for your 2009 Ford Fusion to my knowledge. Instead, you will want to choose from the Curt Trailer Hitch Receiver part # C11329 which has a 1-1/4" receiver tube opening. In order to get a 2" receiver tube opening on your Fusion you will need to use an adapter like part # HTAD but please keep in mind that this will reduce the hitch capacity by 50%. If you can tell me what you need a 2" trailer hitch for, I would...
view full answer...
Parts Needed to Use Darby Kayak Carrier DTA944-968-924 on 2007 Ford Fusion
The hitches that are made or your 2007 Ford Fusion are the 1-1/4-inch Class I type, such as the Curt # C11329 that I recommend, so in order to use a 2-inch hitch-mount kayak carrier like the Darby # DTA944-968-924 you'll need a hitch adapter # HT5R to give you the needed 2-inch hitch opening. This adapter not only gives you the larger receiver opening but it also will give you 5-inches of rise (height gain) which will improve your ground clearance when using the Darby carrier. All adapters...
view full answer...
Curt Trailer Hitch # 11329 Vs. Hidden Hitch # 60846 for a 2008 Lincoln MKZ
Both the Hidden Hitch Trailer Hitch # 60846 and the Curt Hitch # 11329 are quality hitches and neither have had any quality or fit issues for us. I attached a page that shows both of these products side by side for you to check out. The only noticeable difference in construction between the two hitches is that the Hidden Hitch has a larger welded on bracket for securing the stinger of the hitch to the cross tube. This might give the Hidden Hitch a slight advantage. I attached installation...
view full answer...
What is Weight of Curt Hitch # C11329 and How Long to Install by Shop
The Curt hitch part # C11329 weighs 22 lbs which wouldn't make any noticeable difference for traction on a front wheel drive car. We've sold quite a few hitches over the years and we've yet to have anyone come back and tell us that winter weather traction was ever effected. Curt lists this hitch as taking about 45 minutes for a shop to complete the install. So less than an hour at their current shop rate. Most shops would charge at least one hour to do the install.
view full answer...
Hitch Availability for a 2009 Lincoln MKZ
We do have hitches available that have been confirmed to fit your 2009 Lincoln MKZ, but if Lincoln says you can't tow with your vehicle then we can't recommend you do so. Basically the hitch manufacturers will make hitches for vehicles as long as there is a demand for them, regardless of what the vehicle manufacturer recommends. For your vehicle you may still be able to carry a bike rack like the Swagman XTC2 # S64670 so a hitch like the Curt part # C11329 would work well for this.
view full answer...
Fit of Trunk Mounted Bike Carrier on 2006 Mazda 6 Hatchback
Your best bet would be to install a receiver hitch like the Curt Class I receiver, part # C11329. The hitch can be used as an attachment point for a bike rack. Because of the limited weight bearing ability of the Class I receiver, you will be limited to carrying two bikes and would need to choose a rack that is compatible with a Class I receiver. None of our bike rack manufacturers recommend using trunk mounted racks on the Mazda 6 hatchback model, because the hatchback is not strong...
view full answer...

< Previous

Next >

Do you have a question about this Trailer Hitch?

Info for this part was:

Written by:

Lindsey S

Expert Research:

Michael H

Expert Research:

Jameson C

Updated by:

Wilson B

Updated by:

Amanda M

Updated by:

Kristina F

Updated by:

Michael B

Updated by:

Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.