Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I have a solution for you but Rhino-Rack's Pioneer Platforms like item #RR78AB and Yakima's feet are not compatible. Instead, to do what you're wanting you will have to remove the Yakima set up and use the following parts on…
view full answer...We have actually run into this issue quite a few times in the past, and there is a simple fix. The reason the Curt Echo Wireless #C51180 locks up the brakes on your camper only at low speeds is due to it being paired incorrectly, usually plugging…
view full answer...We absolutely have an extension for a 7-way trailer wiring harness with a male and female end. You can choose from a number of different lengths in order to get the size you need. I'll go ahead and list out the extensions by overall length so…
view full answer...In-bed wiring used for fifth wheel and gooseneck hitch should do the trick. What you would want is the Curt 5th Wheel/Gooseneck Wiring Harness 7-Pole #C56000. This will plug in line with the 7-way at the rear of your truck and then would allow you to…
view full answer...The base dimensions of the B and W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch Adapter #BWRVK3050 is 18 x 18-inches and will install it in an opening that measures 20 x 20 x 4-inches deep. The recessed opening cannot be more than 4-inches…
view full answer...When determining what screen door latch you would need either the right hand or left hand side you would need to look at the closed door from the inside of your RV. The latch location is the side of the door that it is mounted on. This would mean…
view full answer...To attach to your round crossbars you will want either the Rhino-Rack Pioneer Platform in a 48"x38" Kit #RR42114BF or the 58"x47" Kit #RR42115BF. The Platform #RR42TB you found is designed to mount with either a set of feet or to…
view full answer...First, your 1995 Chevy 3500 is going to need a 7-Way trailer connector if it doesn't have one already. To add a 7-Way you will first need to have a 4-Way flat connector if the truck does not already have one. Use #118315 to add a 4-Way. Then to…
view full answer...Yes, the Firestone Ride-Rite Air Helper Springs part #F2299 will work with the TorkLift StableLoad Rear Suspension Upgrade part #TLA7311 and or part #TLA7200 that you already have installed on your 2013 Ram 2500. It may also very well eliminate the…
view full answer...For HappiJac Camper Tie Downs for your 2021 Ram 2500 8' bed we have part #LC236326-205221. This comes with both the front and rear tie downs.
view full answer...Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…
view full answer...We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…
view full answer...Related Searches
Filter Your Search
Contact and Help