Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
This item does not fit your vehicle
2011 Audi Q7
These items fit your vehicle
2011 Audi Q7
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you want to carry a couple of bikes or tow a small trailer, this Curt trailer hitch receiver makes it easy. It’s rated for 2,000 lbs maximum gross trailer weight and 200 lbs tongue weight, giving you just the right strength for light towing or cargo carriers. With its sturdy square-tube design and concealed cross tube, it keeps a clean look while still being solid enough for everyday use.
You don’t need to weld or make complicated modifications to get this hitch on your vehicle. The custom fit is designed specifically for the mounting points already built into the frame, and the included hardware kit means you can bolt it up with standard tools. Precision robotic welding helps everything line up where it should, so the install goes together smoothly in a driveway or garage.
This hitch is built from fully welded steel for lasting durability. The gloss black powder coat finish sits over a protective base coat to fight off rust and corrosion from weather and road grime. You get a solid, heavy-duty feel that holds up trip after trip without looking rough under the bumper.
Once installed, this 1-1/4" receiver is ready for typical towing setups. Drawbar, pin, and clip are sold separately, so you can match them to your trailer or bike rack setup. With its Class I receiver opening, it fits the most common light-duty towing accessories so you can haul what you need safely and securely.
Customer Satisfaction Score:
86% were satisfied with this product
14% of customers were not satisfied
Ratings & Reviews
Very solidly built, fairly easy to install, took some adapting to my car frame.
Easy to install
No issues
Unit was easy to install, was very happy with quality. Will definitely will order in future on next project.
It took a long time to receive the hitch and I didn’t immediately mount it to the car. When I did try to mount it I found that it was bent and I have not attempted to bend it back to the correct shape which I think is difficult as it is a compound bend. I thought as the car is older (2007 Mercury Milan 6 cylinder/dual exhaust) , it was difficult to source and I thought I could fit it. I still have the original box and all the parts if you are interested in exchanging it.
Solid construction. Perfect fit. Works perfect. I am very happy with customer service and support.
The kit was put together well, including the alignment of the welds. It include all necessary hardware and has been working well for a year now.
Live in dry hot climate and use it to toe a kayak with a small car. Install was easy enough. Fits well. Works as expected.
Best thing I recall was my customer service experience with the company. They went above & beyond what I consider average. They went to extra mile to make my shopping experience easy.
Most importantly the hitch fit our vehicle as promised. The receiver is high quality with strong welds and a nice paint job. I haven't had to use it much yet but is ready!
Very sturdy well built hitch, one problem though is interference with spare tire wheel well. Otherwise great product, fishing line was genius.
Very easy to install yourself if you have the tools(drill, and several different sized bits). I’ve never installed a hitch before, but I watched the video, and followed the instructions. Took me 65 minutes from start to finish, including clean up. My Kuat Sherpa slid right in and isn’t going anywhere lol.
Very prominent shipping and of course a very nice hitch. Curt's make hitches better today than the other 2 did years ago when they were also made here.
Great hitch go USA
Well built hitch. The only thing I'll have to say is have "quality" drill bits if you are installing on a Fusion. The bumper steel must be harden to withstand a rear crash. I dulled 3 and broke 1. Other than that the install was very easy. I loved the fish wire that came with the pack. Don't think I could get the bolts to the hole from the side into the drilled holes if it was not for the fish wire. I am truly glad that I found etrailer on the web. They have my business.
Thanks
So far so good! Installation was pretty straightforward a few holes were a quarter inch out of alignment... But it wasn't bad... So far I only use this hitch to haul a 2X bike rack.
the difficulty of your install will depend on your vehicle. I have extensive rust on my vehicle so it made it harder than it needed to be. the product and hardware from etrailer was good quality. No problems one year later. I'll be buying hitches from etrailer in the future
Installation was a bit difficult because for some reason the steel in the bumper was pretty tough. The first screw to be threaded through with the little threading tool went well. The second one was more difficult because the spiral that engages into the screw threads was no longer perfect. If I had two of those threading gizmo's it would have gone easier for threading the bolt through the bumper. But I did get it on.
Once in place, I have to say that the fit was perfect. The hitch was right below the bumper and having had it on the car now for about two, maybe three months, I haven't scraped it yet. So, it is up high enough to stay out of the way when coming out of steep aprons.
I am happy with it and would buy this or one made by Curt again.
You may notice from the picture that I did have this hitch modified so that I could put a 2" receiver in. I know this doesn't automatically make it a class III, I just did it to keep my bike rack from swaying so much. It does work.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Brooke M.
8/24/2022
Thanks for reaching back out. I am sending this to our customer service team and they will be in touch with you soon.