Replacement Safety Strap Recommendation for Truxedo Lo Pro QT Tonneau

Question

Question:

Will tx1115355 work with TRUXEDO LO PRO 581601?

asked by: Joshua B

0

Expert Reply:

Yes, the Replacement Safety Strap # TX1115355 that you referenced is the correct strap for your Truxedo Lo Pro QT part # TX581601.

expert reply by: Jameson C

0

Answer 1

I spoke to Truxedo about the Truxedo X15 Tonneau Cover and they informed me that the correct replacement retainer straps for a truck with 8' bed is the Replacement Safety Straps for TruXedo Lo Pro and TruXedo Deuce Soft Roll-up Tonneau Cover part…

view full answer...

Answer 2

I spoke with my contact at Truxedo and she did confirm that the Replacement Safety Strap #TX1118185 referenced in your question is the correct part and will work perfectly on your Truxedo Pro X15 Tonneau Cover. This will replace the broken hook and…

view full answer...

Answer 3

The plastic hook on the Replacement Safety Strap part #TX1115355 which is a fit for the TruXedo Lo Pro QT and TruXedo Deuce 2 Tonneau Covers will secure to a loop on the backside of the cover which you can see in the attached photo.

view full answer...

Answer 4

There are two different replacement straps, though the length is similar. One is the 13 inch Replacement Safety Strap for TruXedo Lo Pro and TruXedo Deuce Soft Roll-up Tonneau Cover #TX1118185. The other is an inch shorter, the 12 inch Replacement…

view full answer...

Answer 5

I've attached the installation instructions for the TruXedo Lo Pro QT Soft Roll-Up Tonneau Cover, #TX579601, which has a very detailed diagram of how and where to install replacement parts. For your convenience, I made an enlarged copy of the…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 10

Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hey Gregory, that's really good information. You’ve got a few options, but I wouldn’t jump straight to replacing the leaf springs on a half-ton for that size trailer. Since you’re using a Curt weight distribution hitch, that should be doing most…

view full answer...

Replacement Safety Strap Recommendation for Truxedo Lo Pro QT Tonneau

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching