Replacement Safety Strap for TruXedo Pro X15 Tonneau Cover

Question

Question:

I have a 2017 Ram 1500 and just installed the Truxedo Pro X15 and the driver side hook is broke i cant roll it up and hook it. My question is will this work on the Truxedo Pro X15?

asked by: Chris M

1

Helpful Expert Reply:

I spoke with my contact at Truxedo and she did confirm that the Replacement Safety Strap # TX1118185 referenced in your question is the correct part and will work perfectly on your Truxedo Pro X15 Tonneau Cover. This will replace the broken hook and allow you to hold the tonneau in place behind the cab when it's rolled up.

expert reply by: Chris R

1

Answer 1

I spoke to Truxedo about the Truxedo X15 Tonneau Cover and they informed me that the correct replacement retainer straps for a truck with 8' bed is the Replacement Safety Straps for TruXedo Lo Pro and TruXedo Deuce Soft Roll-up Tonneau Cover part…

view full answer...

Answer 2

I've attached the installation instructions for the TruXedo Lo Pro QT Soft Roll-Up Tonneau Cover, #TX579601, which has a very detailed diagram of how and where to install replacement parts. For your convenience, I made an enlarged copy of the…

view full answer...

Answer 3

There are two different replacement straps, though the length is similar. One is the 13 inch Replacement Safety Strap for TruXedo Lo Pro and TruXedo Deuce Soft Roll-up Tonneau Cover #TX1118185. The other is an inch shorter, the 12 inch Replacement…

view full answer...

Answer 4

Yes, the Replacement Safety Strap #TX1115355 that you referenced is the correct strap for your Truxedo Lo Pro QT part #TX581601.

view full answer...

Answer 5

The plastic hook on the Replacement Safety Strap part #TX1115355 which is a fit for the TruXedo Lo Pro QT and TruXedo Deuce 2 Tonneau Covers will secure to a loop on the backside of the cover which you can see in the attached photo.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 11

Hello again, Dan. Thanks for writing in. The Demco Stay IN Play DUO Inline Air Pressure Regulator #DM88UV will not be needed for your 2025 Maverick Hybrid. You can still install one to lessen the braking pressure if it seems too harsh, but it…

view full answer...

Answer 12

Hey Alan! The Demco Tabless Base Plate Kit #DM77YV won't have any issues working with the Roadmaster Nighthawk All-Terrain Tow Bar #RM-676. You will also need an adapter #DM9523062 to make the two compatible. For the rest of the parts I recommend…

view full answer...

Replacement Safety Strap for TruXedo Pro X15 Tonneau Cover

Product Page this Question was Asked From

Continue Researching