Can Tandem Axle Trailer Have Axles With Two Different Weight Capacities?
Updated 05/04/2018 | Published 05/03/2018 >
Question:
I have tandem trailer that has a 2500 5 bolt axle and A 3500 6 bolt axle can I use it like this long term if so which axle should be at rear
asked by: Ernesto
Expert Reply:
It is a good idea for both axles on a tandem axle trailer to have the same rating. Even if the 6,000 lb capacity of your axles is rated high enough for your trailer, if you have a load heavier than 2,500 lbs sitting over your 2,500 lb rated axle it will not be able to handle it. I recommend replacing that axle with one rated for 3,500 lbs such as # T3584F-8974. This axle measures 89" from hub face to hub face and 74" from spring center to spring center.
You will need to know those two measurements (hub face to hub face and spring center to spring center) in order to get the correct replacement axle. I've added a link to our selection of 3,500 lb axles for you to check out.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Search Results: trailer hub
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
- Search Results: trailer leaf springs
- Search Results: trailer tires and wheels
- Search Results: trailer hubs and drums
- Q&A: Smallest Compatible Wheel for 12 Inch Brake Hub/Drum
- Q&A: Will 235/80-16 Trailer Tire Fit on 6-1/2 Inch Wide Wheel
- Q&A: Can a Hub/Drum Be Installed on Axle Without Electric Brake Assembly
- Shop: Easy Grease Trailer Hub and Drum Assembly for 7K Axles - 12" - 8 on 6-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Shop: 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long
- Q&A: Hub and Drum Assembly with Inner Bearing 1.75 ID and Outer Bearing 1.25 ID
- Search Results: leaf spring
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: 7k hub
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Q&A: Who Makes The Best Quality Trailer Bearings?
- Shop: Suspension Enhancement
- Shop: Brake Controller
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K


