Wiring Harness for 2011 Toyota Tundra With Factory 7-Way

Question

Question:

Before I buy this I wanted to be 1000 sure it was the right part to replace my factory unit. I have a 2011 Tundra DC. Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors - C55774

asked by: Michael

0

Expert Reply:

The Curt T-Connector # C55774 is a confirmed fit for your 2011 Toyota Tundra with factory 7-way; you'll only need to plug it into the tow package wiring harness. I've added a link to a video review and install for you to take a look at.

expert reply by: Kyle S

0

Answer 1

Hey Steven, Without knowing the weight of the boat/trailer combined it is hard to tell what capacity jack you will need. Generally something like the Fulton XLT #F26ZR is a good option. It is a sidewind manual jack that bolts around the frame. Offers…

view full answer...

Answer 2

Hello Johnny, thanks for reaching out. Sadly, no we are not able to look up trailer parts using a VIN. There just isn't a universal VIN database for trailers like there is for motor vehicles. Typically only the manufacturer of the trailer would…

view full answer...

Answer 3

Since you already have the factory wiring, you can replace the trailer connector with the Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End #HM40975 or the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package…

view full answer...

Answer 4

I believe the Tundra uses the #HM40975 for the trailer connector. Typically they fit pretty tightly, so we haven't got much in the way of comments about folks having the difficulty you describe. For a more traditional-style connector that would…

view full answer...

Answer 5

Curt offers a Replacement 7-Way connector #C55774 that will plug in to the round U.S. Car connector included in your factory tow wiring. This kit includes a 7-way socket and mounting bracket and it also includes a 4-pole connector as well. The part…

view full answer...

Answer 6

For a replacement 7-Way trailer connector with short wiring harness attached for your 2017 Toyota Tundra you can use Curt harness #C55774. I have linked a video showing an example installation on a Jeep (which it also fits) for you.

view full answer...

Answer 7

The Replacement Master Cylinder Assembly for Dexter Brake Actuators - Disc Brakes #DX44FR can be used to replace the A-60 master cylinder and is designed to fit on a variety of Dexter/UFP brake actuators.

view full answer...

Answer 8

My technical contact at Wesbar informed me that the submersible light that you have was discontinued a while back so replacement lenses are unavailable. Replacing your tail lights is going to be your best option. The Wesbar Submersible Right Hand…

view full answer...

Answer 9

I spoke with my technical contact at Titan and showed him the photo that you sent in of your actuator. My contact confirmed that you actuator is a Model 60. The right replacement master cylinder for you will depend on what kind of brakes the actuator…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Wiring Harness for 2011 Toyota Tundra With Factory 7-Way

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching