Looking For A Replacement Jack For My 26 Foot Pontoon Trailer

Question

Question:

Hi ..I need to purchase a boat jack with wheel for my 26 foot pontoon boat. Can you suggest a size and or product for me. Thanks.

asked by: Steven M

0

Expert Reply:

Hey Steven,

Without knowing the weight of the boat/trailer combined it is hard to tell what capacity jack you will need. Generally something like the Fulton XLT # F26ZR is a good option. It is a sidewind manual jack that bolts around the frame. Offers a 1,500lb capacity and a caster wheel to make maneuvering easy.

If you want to let me know a little bit more about the weight of your trailer and or boat I can take a look and see if there is a better fit option.

expert reply by: Nick S

0

Steven

11/19/2025

Hi Nick, the boat and trailer are about 3600 pounds. Just wondering if there is a little less expensive option than the original one you suggested. Thanks in advance.

Nick S.

11/19/2025

@Steven Thank you for getting me that information. We have an etrailer boat jack # MJ-1200B that is going to offer a 1,200lb lift capacity. For your boat and trailer this is plenty. It installs around trailer frames 2"- 4" tall so you want to double check that yours will accommodate this jack. I think you will like that price tag a bit better than the first one I suggested. Fully extended this jack sits at 23-1/2" and fully retracted 12-1/2".

Answer 1

Since you already have the factory wiring, you can replace the trailer connector with the Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End #HM40975 or the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package…

view full answer...

Answer 2

For a replacement 7-Way trailer connector with short wiring harness attached for your 2017 Toyota Tundra you can use Curt harness #C55774. I have linked a video showing an example installation on a Jeep (which it also fits) for you.

view full answer...

Answer 3

I believe the Tundra uses the #HM40975 for the trailer connector. Typically they fit pretty tightly, so we haven't got much in the way of comments about folks having the difficulty you describe. For a more traditional-style connector that would…

view full answer...

Answer 4

The Curt T-Connector #C55774 is a confirmed fit for your 2011 Toyota Tundra with factory 7-way; you'll only need to plug it into the tow package wiring harness. I've added a link to a video review and install for you to take a look at.

view full answer...

Answer 5

Curt offers a Replacement 7-Way connector #C55774 that will plug in to the round U.S. Car connector included in your factory tow wiring. This kit includes a 7-way socket and mounting bracket and it also includes a 4-pole connector as well. The part…

view full answer...

Answer 6

Hey Bruce! I'm not too sure what you're looking for, but I see that you were looking at trailer jack's so I'll assume that's what you're referring to. If this is the case, the etrailer Boat Trailer Jack w/ 2 Wheels…

view full answer...

Answer 7

The Fulton XLT Bolt-Thru Swivel Trailer Jack #F26ZR comes with brackets that would allow you to attach to the trailer frame that bolt around the frame but if you wanted to drill holes in the trailer frame and attach it through the frame you could do…

view full answer...

Answer 8

The two kits both have the same taillight but the part #TLL160RK only comes with the two light assemblies whereas the part #TLL16RK comes with additional wiring to from the front of the trailer to the rear as well as a license plate bracket.…

view full answer...

Answer 9

Most likely on your trailer the brown wire is for running lights, the green wire is for right turn/brake light, the yellow is for left turn/brake, and the white wire is for ground. Because previous owners or trailer manufacturers may have installed…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Looking For A Replacement Jack For My 26 Foot Pontoon Trailer

Continue Researching