Replacement 7-Way Trailer Connector with Short Wiring Harness for a 2017 Toyota Tundra

Question

Question:

I need a 7 wire trailer plug with wire for a 2017 toyota tundra

asked by: G W

0

Expert Reply:

For a replacement 7-Way trailer connector with short wiring harness attached for your 2017 Toyota Tundra you can use Curt harness # C55774. I have linked a video showing an example installation on a Jeep (which it also fits) for you.

expert reply by: Michael H

0

Answer 1

Hey Steven, Without knowing the weight of the boat/trailer combined it is hard to tell what capacity jack you will need. Generally something like the Fulton XLT #F26ZR is a good option. It is a sidewind manual jack that bolts around the frame. Offers…

view full answer...

Answer 2

Curt offers a Replacement 7-Way connector #C55774 that will plug in to the round U.S. Car connector included in your factory tow wiring. This kit includes a 7-way socket and mounting bracket and it also includes a 4-pole connector as well. The part…

view full answer...

Answer 3

The Curt T-Connector #C55774 is a confirmed fit for your 2011 Toyota Tundra with factory 7-way; you'll only need to plug it into the tow package wiring harness. I've added a link to a video review and install for you to take a look at.

view full answer...

Answer 4

I believe the Tundra uses the #HM40975 for the trailer connector. Typically they fit pretty tightly, so we haven't got much in the way of comments about folks having the difficulty you describe. For a more traditional-style connector that would…

view full answer...

Answer 5

Since you already have the factory wiring, you can replace the trailer connector with the Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End #HM40975 or the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package…

view full answer...

Answer 6

It sounds like you have a crossed wire after the fuse panel. Sometimes this happens inside the trailer connector, so I recommend removing your trailer connector and using a circuit tester like #PTW2993 to test each of the wire functions at the US Car…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Replacement 7-Way Trailer Connector with Short Wiring Harness for a 2017 Toyota Tundra

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching