Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re setting up a trailer with extra wiring needs, this adapter keeps things simple. It converts a standard 7-pole blade connection to a 5-pin Delphi plug and includes a built-in 2-pin plug for a backup camera. Everything stays cleanly connected without needing extra cords or splices.
Instead of dealing with slack wire dragging on the ground, this coiled cable stretches up to 94-1/2". It stays compact when parked or disconnected, then extends smoothly to reach your trailer when it’s time to tow. The coil design keeps things neat and out of the way.
The strain relief at the connector measures about 3-1/4" long and passes cleanly through a 3/4" hole. That makes routing through panels or junction boxes easier and keeps the wiring protected from pull or twist.
With both trailer lighting and camera leads built into one harness, there’s no need to run separate lines. The Optronics design ties together the essentials—power, lighting, and backup view—into one simple plug-and-lead setup for quick hookups every time.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this seven pole blade to five pin delphi connector. This is going to convert a tow vehicle's seven pole wiring connection, to a five pin delphi trailer connection, with the two pin camera connection, so that you can see your camera when you're towing a trailer with a backup camera. So you'll be able to monitor that feed. This does have a grip handle on the seven way plug for an easy connection and disconnection, easily pull it out, gives you plenty of grip there. You can see this does have the coiled cord that's gonna stretch and contract to prevent unnecessary stress on the wires.
It's gonna keep it up off the ground but still give you plenty of length so that you can run through. It does have this threaded mounting bracket, that's gonna ensure secure connection to the vehicle there. You can see it also comes with this mount, that's gonna make it very simple to keep your plug up off the ground when it's not in use. You just store it there, once you have this mounted in place. So if you are looking for a cable that's going to convert your tow vehicles seven pole wiring connection to that five pin, delphi trailer connection, the two pin camera connection, this is gonna be exactly what you need.
That completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
Ratings & Reviews
good price and exactly what I needed.
Great quality
cant say enough good things about my experience
from ease of shopping to fast delivery
i will definitely be back next time
you folks are the best!
Good communication. Only place I could find this specific hook up
Product came well packed and exactly as described. I have not installed yet, but I do t anticipate any issues.
Always have what I need at a reasonable price and quick delivery.
The 7-way replacement cable fits great, and it arrived just in time. Thanks!
Plug head is too small forn7-pin connector. The weight of the coil is causing wabble and loose connections.
Awesome customer service
This replacement is much improved, with thicker wiring and sheath. So then is a bit larger and had to adjust to install. But works perfectly...and hopefully will.not have the issue of the rubber sheath peeling off the wires. I included a photo of the installation with the original pictured. I had taped it, so cannot see that it was falling apart.....so please pass on to Optronics
Frank
7/6/2025
Great....no problems. Surprising that is better and more sturdy than the original. So I guess that Optonics made some improvements
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lazer S.
9/9/2025
This is the first time I have heard of this happening. The flap/cover on the vehicle's 7-way should keep the plug securely in place, but if it isn't, that would definitely be an issue. Is the 7-way on your vehicle a factory 7-way or aftermarket? If factory, what is the year, make, and model of said vehicle? If aftermarket, do you know what brand it is and how old it is?