Picking Out Replacement Landing Gear Box for 2007 Fleetwood GearBox 335fs

Question

Question:

I have a 2007 Fleetwood GearBox 335fs. Need to replace the Fifth Wheel Landing Gear Box, is this the Gearbox I need ? I dont know if this is the correct Part number? LC276602 Thank You,

asked by: Francisco C

0

Expert Reply:

The part # LC276602 is a gear box that fits the vast majority of landing gear sets found on RVs. If what you have looks like this and is plastic or aluminum like this it will fit and work well.

If you have something different email me back a brand or a picture and I'll take a look.

expert reply by: Jameson C

0

Answer 1

We do have motors that you can add to your landing gear. For example, the Landing Gear Set #RVLG-8000 can be operated with the manual crank #RVLG-HDL but you can also add the motor #LC142178 and switch #LG-145236 for effortless operation on your end.…

view full answer...

Answer 2

There are actually a couple differences between the Curt EZr #C619-648 and the Double Lock #C60712. The visible one will be that the safety chains on the #C60712 are not centered like the ones on the #C619-648. The difference that is not visible is…

view full answer...

Answer 3

I assume you're speaking of the Andersen Ultimate 5th wheel connection that attaches to the gooseneck ball. According to Andersen, their Ultimate 5th wheel connection is indeed compatible with the Curt #C60712 Double Lock, Flip and Store…

view full answer...

Answer 4

Hey Ronnie, The crossbeam of the slider base on the B&W Patriot 5th Wheel Trailer Hitch w/ Slider #BWRVK3270 unfortunately sits too low and fights for the same space as the handles/side mounting plates of the Curt Rail Adapter #C88KR (16027) so…

view full answer...

Answer 5

First, let's start with if you can use a sliding hitch in a long bed, and yes you definitely can, you simply won't use the slide feature but otherwise it will work exactly the same. As for the hitch and base rails, I highly recommend the…

view full answer...

Answer 6

Hello Bill. 5th wheel hitch technology has come a long way in the last several years. If you are using an old hitch, it is definitely not uncommon to have issues like this. Most older hitches, and even some new lower-end hitches will chuck quite a…

view full answer...

Answer 7

Short bed trucks work well to pull 5th wheel trailers, but they require a sliding hitch like the B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs #BWRVK3270 which will work well with your trailer. This hitch has 12 inches of…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 12

Hey Ross, the B and W Turnoverball #BWGNRK1067 wasn't designed to fit under a flat bed so there isn't an alternate set of measurements I can recommend. Are you sure it would clear under the flat bed? Normally we have to recommend the…

view full answer...

Picking Out Replacement Landing Gear Box for 2007 Fleetwood GearBox 335fs

Product Page this Question was Asked From

Continue Researching