Stop/Turn/Tail Wiring Connection to Side Clearance Marker Light

Updated 09/15/2017 | Published 09/14/2017

Products Featured in This Question

Optronics LED Trailer Light - Brake, Tail, Turn - Submersible - Oval - Red

(1705)

$12.44

2-to-3 Tail Light Converter for Towed Vehicles w/ Incandescent Tail Lights

(173)

$40.96

3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead

(390)

$4.69

Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead

(707)

$4.44

Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Red

(2579)

$11.57

Question:

I recently had some damage to my trailer lights which warranted replacing them. I have to replace the wiring as well. I have a part number on the connector 53874 Taiwan. The wiring harness goes into the tail light #STL72RB which is a Stop/Turn/Tail LED and there is another wire than branches off of that into a side marker clearance light #AL91RB. I cannot find the connector that I need. Please help!

asked by: Matt R

Expert Reply:

For your Trailer Tail Light - Stop, Tail, Turn - LED - Waterproof - 10 Diodes - Red Lens # STL72RB and Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Red # AL91RB, you will need the Wiring harness # A45PB as well as # A46PB.

If you want the side marker light to only be a running light you will connect to the black wire. If you want it to be turn only, you will need to use the Vehicle to Vehicle Tail Light Converter # 118158 to isolate that function.

expert reply by: Jason S