Adapting a Thule XSport Ladder Rack for a 2017 Toyota Tundra

Question

Question:

Hi, Do you know where I could buy the Thule XK1 adapter kit. Thanks.

asked by: Doug H

0

Expert Reply:

The part number for the Thule XSport adapter for the 2017 Toyota Tundra is part # THXK3. This will adapt the ladder rack to work with your vehicle's installed rail system.

The XK 1 kit was made for vehicles produced before 2005 and no longer is available, but part # THXK3 directly replaces it.

expert reply by: Jacob W

0

Answer 1

The correct load stops for a TracRac Ladder Rack will be based on which version you have. If you have the Thule branded ladder rack then you will need to use the Thule TracRac Ladder Rack Load Stop part #8537165 with the Washer part #951-0820-20 and…

view full answer...

Answer 2

Hello Joe, Thanks for writing in! Based on the measurements you provided, the Gen-Y Glyder Shock Absorbing Ball Mount #325-GH-12001 is not the right fit for your setup. Since your Tundra's receiver measures 18 inches from the ground and your TAB…

view full answer...

Answer 3

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 4

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 5

I checked with Timbren, and the overall height (from the top of the bracket that bolts to the frame to the bottom of the spring) is 6 inches for the Timbren Suspension Enhancement System #T45MR.

view full answer...

Answer 6

Hey Bryan, thanks for reaching out. We do offer the TracRac base rails for the 2016 Toyota Tundra long bed. Here is what you'll need: - Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks #TH21011 What will you be using the ladder rack…

view full answer...

Answer 7

You're correct, the Yakima OverHaul HD ladder racks like part #Y01151-58 only come with two locks. The towers lock into bases and these bases are what the locks attach to. The intention is that you would use one lock base on each set of towers to…

view full answer...

Adapting a Thule XSport Ladder Rack for a 2017 Toyota Tundra

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching