Correct Replacement Load Stops for TracRac Ladder Rack

Question

Question:

I need 4 tracrac load stops, but I see there are two different versions. I have a utility body with a tracrac. How do I know which load stops will work in my tracrac?

asked by: Liam F

0

Expert Reply:

The correct load stops for a TracRac Ladder Rack will be based on which version you have. If you have the Thule branded ladder rack then you will need to use the Thule TracRac Ladder Rack Load Stop part # 8537165 with the Washer part # 951-0820-20 and Hand Knob part # 753-0776-09. We also offer the complete kit for the Thule branded ladder rack, the Replacement Load Stop Kit part # 753-3761.

If you don't know which version you have, just look for the sticker on the base/upright. If you have an older ladder rack then odds are you have the TracRac branded ladder rack.

expert reply by: Conner L

0

Kevin

11/25/2024

If i have the original TrackRac, then which load stops will work?

Jameson C.

11/25/2024

@Kevin Thule TracRac Ladder Rack Load Stop part # 8537165 with the Washer part # 951-0820-20 and Hand Knob part # 753-0776-09.

Answer 1

Hey Beth, thanks for reaching out! Yes, what you have there is one of the 1st Gen models of the TracRac SR ladder rack. The correct load stop part number you're looking for is 01-23321, but this was discontinued back in 2022. In order to get a…

view full answer...

Answer 2

The part number for the Thule XSport adapter for the 2017 Toyota Tundra is part #THXK3. This will adapt the ladder rack to work with your vehicle's installed rail system. The XK 1 kit was made for vehicles produced before 2005 and no longer is…

view full answer...

Answer 3

Hey, Jim. You can definitely use rivets instead of the T-bolts to attach the tracks for the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B to your roof. We’re not able to swap the bolts out for rivets before shipping, but you should be…

view full answer...

Answer 4

Hey Jason, There really isn't a specific "size" T-slot on many brands. Majority of aftermarket racks use the same size T-slots to make products as universal as possible. Luckily on the Rhino Rack load stops #RRRLH2 there is a full list…

view full answer...

Answer 5

For your Thule WingBar Evo Crossbars, like #TH711420, you can use the Thule load-stops 314! Alternatively, you could also use the: -Load Stops for Yakima HD Bar, JetStream, FlushBar, and RailBar Crossbars #Y01161, or the, -Load Stops for Rhino-Rack…

view full answer...

Answer 6

Great question. The TracONE at 27000B is the discontinued older model which has been replaced by the #TH27000XTB. Thule bought out TracRac and the only real update to that specific rack is the style of the hold downs. The newer style is more user…

view full answer...

Answer 7

The Thule knob #853-5714 is not a confirmed fit for the TracRac load stops. The Thule knob will accept an M8 x 1.25 thread pitch bolt and is designed to be used with an M8 x 1.25 x 25mm Carriage Bolt. The bolt on the TracRac load stops is a 3/8 - 16…

view full answer...

Answer 8

The Replacement Knob for Thule Professional Ladder Tilt, #853-5714, will accept an M8 x 1.25 thread pitch bolt and is designed to be used with the M8 x 1.25 x 25 mm Carriage Bolt for Thule and DeWalt Contractor Series Ladder Lift. The replacement…

view full answer...

Answer 9

You can transfer the Thule TracRac SR #TH43003XT-010 from your 2003 to your new 2024 F-250. The base rails you need to move the rack to your 2024 are the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks #TH21000. These come with all of…

view full answer...