Installing a Brake Controller on a 2015 Ram 1500
Updated 08/30/2017 | Published 08/28/2017
Products Featured in This Question
Question:
If I dont have the plugs under dash then what
asked by: Bryan
Expert Reply:
You should have a single plug under the driver side dash on your 2015 Ram 1500 that you will simply need to connect an Adapter, like part # 3024-P, to for installing a Brake Controller, like the Tekonsha Prodigy P3 # 90195. If you check out the attached video of this setup being installed on a 2015 Ram 2500 (starting at the 1:56 mark) you will see where our installer finds the plug.
If you do not have the connector under the dash (which you should), then you will need to do some splicing. With the pigtail that comes with the Prodigy P3 you will need to connect the White wire to Ground, the Blue wire to your 7-Way connector, the Black wire to your Battery, and the Red wire to the COLD side of your Stop Light Switch. I have attached a picture demonstrating the setup for you.
If you happen to not have any connector for your trailer at the rear of your 1500 then you will want to install the Tekonsha Wiring Kit # 119250KIT for a 4-Way connector. You can then install the Universal Wiring Kit # ETBC7 which will give you all of the wiring and connectors that you need for a fully functioning 7-Way on your 1500.
I have attached some sample installation videos for you to follow, but you will need to make sure that you are testing any of the wiring that you haven't installed with the Circuit Tester from the Tekonsha wiring kit to ensure that you are tapping in to the correct lighting functions.
I have also attached a few helpful articles for you to check out.
Product Page this Question was Asked From
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ram
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Search Results: weight distribution hitch
- Search Results: brake controller
- Shop: Tekonsha Primus IQ Trailer Brake Controller w/ Custom Harness - Up to 3 Axles - Proportional
- Q&A: Which Install Harness for Primus IQ Brake Controller and 2019 Ram 1500 Classic
- Search Results: vehicle snowplow snow plow
- Search Results: front receiver hitch
- Q&A: 2004 Dodge Ram Wiring Parts Needed for Fully Functioning 7-Way
- Q&A: Solution for WDH That Covers Multiple Trailers
- Shop: Trailer Hitch
- Q&A: Recommended Proportional Electric Brake Controller With Wiring Adapter For 2015 Ram 1500
- Q&A: Does a Trailer With 89 Degree Nose Need Slider or Sidewinder for Making Sharp Turns
- Q&A: Does a Tekonsha Primus IQ Brake Controller Need to be Removed when Not In Use
- Q&A: Install Harness Recommendation for Installing Tekonsha Primus IQ in 2011 Ram 3500
- Shop: Andersen Weight Distribution Hitch w Sway Control - 6" Drop/Rise - 10K GTW, 1.4K TW
- Shop: Curt Echo Under-Dash Bluetooth Brake Controller w/ Custom Harness - Up to 4 Axles - Proportional
- Shop: Curt Discovery NEXT Trailer Brake Controller w/ Custom Harness - Up to 4 Axles - Time Delayed
- Shop: Tekonsha Voyager Trailer Brake Controller w/ Custom Harness - 1 to 4 Axles - Proportional
- Shop: Curt TriFlex NEXT Trailer Brake Controller w/ Custom Harness - 1 to 4 Axles - Proportional
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ram
- Shop: Vehicle Snow Plows
- Shop: Front Mount Hitch