Which Brake Controller Install Harness is Recommended for a 2015 Ram 1500

Question

Question:

I have a 2015 ram 1500, will my old adapter from my 2010 ram work on thus new ram? Thanks

asked by: Joe L

0

Expert Reply:

The adapter needed to install your P2 brake controller # 90885 in your 2015 Ram 1500 is the part # 3024-P. This would not be the same as what you have for your 2010 Ram so you would need to go with the # 3024-P.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The correct brake controller install harness to use on your 2015 Ram Sport 1500 is the #3024-P if you plan to use a Tekonsha brake controller. For a brake controller I would recommend the Prodigy P2 Brake Controller part #90885. This is our best…

view full answer...

Answer 2

As long as the Tekonsha Primus IQ Trailer Brake Controller #TK90160 that you referenced is set up correctly the braking setting will largely be based on the brakes of the trailer. When I say installed correctly I mean that you have the controller…

view full answer...

Answer 3

The Prodigy P2 brake controller #90885 and the Primus IQ #TK90160 share some basic features, but there are many differences. The most obvious ones are the displays and appearances of the units, which are connected to the usability of the brake…

view full answer...

Answer 4

Hello Johnny. I am going to give you 2 options for your 2018 Ram 4x4. First option is our most cost effective proportional brake controller, the Tekonsha Primus IQ Trailer Brake Controller w/ Custom Harness - 1 to 3 Axles - Proportional #TK37ER. This…

view full answer...

Answer 5

There are so many possible configurations of trucks, including the 2015 Ram 1500, that it is entirely possible that some do not have the brake controller port or harness present. Typically this would be the case on the base model or work truck models…

view full answer...

Answer 6

You do have a port for connecting the plug-in adapter for a brake controller under your dash. This is typically found under the dash to the left of the console. The attached photos shows the connector and where it should be. It could be really buried…

view full answer...

Answer 7

As long as it's not in the way for your daily vehicle use you will be just fine to leave your Primus IQ brake controller part #TK90160 installed all the time as that is what nearly everyone does with their controllers. Now if the controller is…

view full answer...

Answer 8

Your dealer should be able to provide the details you're looking for based on the VIN. I'd agree, since that fuse is installed, you very likely have the factory 7-way tow package. Although most 1997 Dodge Ram trucks will have the connector…

view full answer...

Answer 9

For your 2015 Ram 1500, I recommend the Tekonsha Prodigy P3 #90195. This is a proportional brake controller, so it will apply the brakes on your trailer at the same time you apply the brakes in your truck and with the same intensity. This controller…

view full answer...

Answer 10

You should have a single plug under the driver side dash on your 2015 Ram 1500 that you will simply need to connect an Adapter, like part #3024-P, to for installing a Brake Controller, like the Tekonsha Prodigy P3 #90195. If you check out the…

view full answer...

Answer 11

There are times when it is tough to locate the brake controller plug under the dash. On the 2015 Ram the factory plug is located between the brake pedal and the emergency brake pedal as shown in the attached photo. It is probably behind another…

view full answer...

Answer 12

Hey George, we used to carry replacement brackets for the Primus IQ with the part #6927 and #5280 but we stopped being able to get it from the manufacturer. The correct harness for the Primus to install in your 2019 Ram Classic 1500 is the part…

view full answer...

Which Brake Controller Install Harness is Recommended for a 2015 Ram 1500

Continue Researching