Can I Replace the Hitch Lock Housing on My Yakima Deadlock Bike Lock and Get a Matching Lock Core?

Question

Question:

Hello. Ive lost a piece of the dead lock for my yakima bike carrier. I dont need the entire assembly, just the little cap piece. I have lots of spare keys, the key is A133. Is it possible to buy just this piece, for this key? This comment box is not letting me attach a picture, but the piece Im talking about is maybe 3 inches long, has a keyed lock, has a hole for the pin to go through, and a little attached cap. In your photo of #8002411, its the black piece inside the circle of cable, not attached to the cable. Thank you.

asked by: Carol K

0

Expert Reply:

Yes, you can replace the hitch lock housing on your Yakima DeadLock. The part you are looking for is the Yakima Replacement Hitch Lock Housing, # Y8820048. You will also need to purchase a replacement lock core to match your existing A133 keys, # Y8771-A133. To insert the Yakima SKS (Same Key System) lock core into the housing, you will need a Yakima Control Key, # Y8007835.

I recently added the Hitch Lock Housing, #Y8820048, to our website. It may take a day or two for the part to go live and be available for purchase.

expert reply by: Amy W

0

Answer 1

The best choice for a trailer hitch for carrying a bike rack with your 2018 Ford Edge SE is the Draw Tite part #75234 as it has the 2 inch hitch size you want, has plenty of weight capacity, and also is only option with a concealed crosstube which…

view full answer...

Answer 2

For your 2018 Ford Edge (Sport or non-Sport) the best hitch based on what you want is the Draw Tite part #75234. This hitch has a concealed crosstube which means only the hitch opening would hang down below the rear bumper. Check out the picture I…

view full answer...

Answer 3

If you had the version of the Yakima DoubleDown that used a threaded hitch pin the lock kit you'd want is the #Y07235 which would use the hitch pin the rack already has. If you wanted an option to lock the rack as well as bikes to the rack…

view full answer...

Answer 4

Hi Victor; like many other bike racks the Yakima DoubleDown uses a uniquely threaded hitch pin so you will need to stick with the Yakima replacement. The hitch pin is the #Y8890176 and then for the lock you can use the #Y07235.

view full answer...

Answer 5

The replacement cable lock assembly you are looking for is the part #Y8890284 for your Yakima HoldUp. To get the correct matching lock core you'd just need to let me know what the key number you have now says.

view full answer...

Answer 6

Oh my! I'm glad that was the only damage! In this case, I recommend purchasing the Replacement Cable Lock Assembly, part #Y8890284 so you can replace the endcap that secures the lock as well as the lock itself, just in case a particularly…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Can I Replace the Hitch Lock Housing on My Yakima Deadlock Bike Lock and Get a Matching Lock Core?

Products Featured in This Question

Continue Researching