Recommended Weight Distribution Drop Shank To Tow Trailer Level
Updated 06/16/2017 | Published 06/14/2017
Question:
I recently purchased a weight distribution system for a more stable tow with a pop up trailer what the problem is the fixed ball mount does not have enough drop how come I cant use a high low reciver to achieve this that I need
asked by: Ron B
Helpful Expert Reply:
To achieve the necessary drop with your weight distribution system in order to tow your trailer level, I recommend switching to a different weight distribution shank such as the Curt Welded # C17123. This shank has a maximum drop of 8-1/2 inches with round bar systems and 8-1/4 inches with trunnion bar systems. This will work with your weight distribution system as long as it uses shank holes with a 3/4 inch diameter. The measurement between the adjustment holes is 1-1/4 inches on center. I have attached a short demonstration video on this product for you to check out.
I have also attached a link that will take you to our available selection of weight distribution shanks that you can look through if the one provided does not give you the needed drop measurement.
Standard high-low adapters are not designed for use with weight distribution systems.
Product Page this Question was Asked From
Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Round - 8 Inch Drop
- Trunnion - 8 Inch Drop
- Round - 12 Inch Rise
- Trunnion - 11 Inch Rise
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Curt Round Bar Weight Distribution System w/ Friction Sway Control - 14K GTW, 1.4K TW
- Search Results: weight distribution hitch
- Search Results: friction sway bar
- Search Results: curt sway bar
- Shop: Curt Friction Sway Control for Weight Distribution Systems
- Shop: Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW
- Search Results: suction cup mount
- Shop: Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Shop: Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen
- Video: What to Know About the Curt TriFlex NEXT Trailer Brake Controller
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Search Results: trailer wiring
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Shop: Trailer Wiring
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Q&A: 2-1/2 inch Trailer Hitch Recommendation for 2008 Dodge Ram 3500 for Use with Hitch Extender
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Q&A: Recommended Brake Controller and Wiring Harness for a 2006 Dodge Ram w/a Factory 4-Way
- Q&A: Upgraded Equalizers for Tandem Axle Trailer With Dexter 13-122
- Shop: Gooseneck Hitch
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
on Accessories and Parts
