Availability Of Double Lip Grease Seal With 1.5" ID And 1.983" OD
Updated 04/22/2024 | Published 04/14/2024
Question:
Hello I have a utility trailer that I’m having trouble finding grease seals it’s a double lip 1.500 X 1.983 X 0.250 Thank You, Bruce
asked by: Bruce
Expert Reply:
Hey Bruce, it sounds like you might have some older seals, perhaps Transcom seals with the 1.983" OD. We do have one seal, the #10-9 seal, which has proven to be a suitable replacement for these seals. This is a double lip seal with a 1.5" ID. The only difference is the outer diameter of this seal is only slightly larger at 1.987 versus 1.983 on your seal. Since there is no double lip seal with a 1.5" ID and 1.983" OD, this will be your best bet. What you can do is actually put the seals in the freezer for about 15 mins before you install them. This will cause the metal to shrink ever so slightly, and it will allow them to install more easily.
These seals are also sold as a pair as part # RG06-020. Looks like it currently costs less if you buy a pair.
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Continue Researching
- Video: Protect Your Bearings! Inside Look at Bearing Buddies with the Manufacturer
- Q&A: Can Dexter Replacement Axle Spindle Retainer Kit be Used on Older 84 D Spindle
- Video: Review of Dexter Trailer Axles - Trailer Spindles - Trailer Suspension Parts - DX82CR
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Video: Detailed Breakdown of the Replacement Spindle Washer
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
- Article: Most Popular Wheel Bearings
- Shop: Replacement Trailer Axle Spindle Retainer Kit for Dexter Axles Manufactered After June 2002
- Shop: Grease Seals (pair)
- Search Results: bearing buddy
- Search Results: dexter hub 8 259
- Search Results: 10~9
- Search Results: tang washer
- Search Results: trailer bearings races seals caps
- Search Results: 6~190
- Search Results: 10 9 grease seal
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Difference Between 205/65-10 and 20.5 x 8-10 Trailer Tire Sizes
- Video: All About the Dexter Trailer Idler Hub Assembly for 2,200-lb E-Z Lube Axles
- Video: Detailed Breakdown of the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles
- Article: Trailer Tire Sizing
- Q&A: How to Select Spare Bearings and Seals for Aluma Trailer with 3500-lb Torsion Axle
- Article: Trailer Wiring Diagrams
- Shop: Suspension Enhancement
on Trailer Bearings Races Seals Caps
Bruce R.
4/22/2024
Hi Jesse yes I was very satisfied for the service at e trailer in sevierville I received the part and all went well thanks again. Bruce