Bearing Kit Recommendation Using L44649 Inner And Outer Bearings
Updated 03/19/2024 | Published 02/01/2015
Products Featured in This Question
Question:
I am looking for a bearing kit race bearing seal etc.My inside bearing is a L44649 outside is L44649 the same bearing. My seal # is 12194TC do you have a bearing kit with a seal that will work for my trailer? Thanks
asked by: Leonard P
Expert Reply:
We do offer bearing kits that have part # L44649 for the inner and outer bearings, but the seal included in the kit does not match the 12194TC seal you said you have. We do have replacement seals that may work just fine for you.
I did some research and found that the 12194TC seal you said you have measures 1.250 inside diameter, and 1.979 outside diameter. The seal I recommend is part # 34823. The dimensions listed for this seal are 1.249 inside diameter and 1.983 outside diameter. The difference of .004 is very minimal but you will still need to use caution when installing. I recommend using a piece of wood and tapping gently until the seal is seated in place.
The bearing kit I recommend is part # BK1-150. This includes inner and outer bearings and races, a grease seal, cotter pin and washer.
Product Page this Question was Asked From
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.72 Inch I.D.
- 2.57 Inch O.D.
- etrailer
more information >
Continue Researching
- Search Results: trailer grease seal
- Search Results: wheel bearing grease
- Search Results: trailer wheel bearings
- Search Results: marine wheel bearing grease
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK1-150
- Article: Most Popular Wheel Bearings
- Q&A: Looking For Seals For 1982 Boat Trailer With 1.98" OD And 1.344" ID
- Q&A: How to Find the Correct Idler Hub Replacement for Boat Trailer
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
- Video: Ultimate Overview of the Timken Replacement Bearing and Race Set
- Video: Review of the Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Search Results: trailer hub
- Shop: Dexter Bearing Kit for 1-1/16" BTR Spindle
- Q&A: How to Identify Replacement Bearings & Seals for Magic Tilt Boat Trailer
- Shop: Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Shop: Timken Replacement Bearing and Race Set - L44649 and L44610
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Video: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles Review
- Search Results: led light trailer lights
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Video: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles Review
- Search Results: dexter hub 8 258
- Video: Feature Review LED Combination Tail Light Kit for Trailers under 80" Wide
- Q&A: Does Grease Cap Included with # 8-258-50UC1-EZ Hub Act Like A Bearing Buddy
- Q&A: 5 Lug Hub That Can Fit Spindle with BTR Dimensions
- Q&A: Trailer Hub that Fits Axle with 2,200 lb Capacity with 5 on 4-1/2 inch Bolt Pattern
- Q&A: Availability of Hubs that Fit 2,200 lb Lippert Axle Spindles
- Shop: Floor Mats
Kevin
3/18/2024
Hello Jeffery I have this seal and both bearings on my trailer, its an EZ loader boat trailer and has an Oil Bath system instead of grease. Do you see any concerns with this for my application?