Fit & Compatibility of Aftermarket Trailer Hitch #C14357 on 2004 Ford F-150 w/Factory Trailer Hitch

Question

Question:

Will the hitch 14357 work if the factory hitch is removed?

asked by: Dave S

0

Expert Reply:

I spoke to my contact at Curt and he informed me that the Curt Class V Trailer Hitch # C14357 would indeed fit for a 2004 Ford F-150 excluding the Heritage Edition if the factory hitch was removed as long as no portion of the frame or bumper beam is removed in the process of removing the factory hitch.

I have linked the above mentioned product to this page for your convenience.

expert reply by: Jackie C

0

Jerry S.

7/6/2020

so why does the other guy say it wont fit on with a factory hitch and do have a video how to install it I bought this hitch about a year ago

Chris R.

7/10/2020

The factory hitch for this truck is essentially built into the bumper frame - so it's just not the ideal application. As Jackie mentioned above, it's technically possible, but you would need to be extra careful when removing the factory hitch.

William P.

12/20/2020

@ChrisR I did work today removed. Stating this for people’s info & have one question at end.I have a 04 F150 lariat super cab w/factory hitch. It’s rusted so bad need replacing. I took of hitch Not welded. But it is attached to bumper with small bolts. Problem is if you take hitch bumper comes with it after unplugging all back up senors, lic. Plate lights, & trailer plugs 7 & flat four. Soooo I cut hitch out between the back end frame mounts. I remounted bumper attached to brackets on Whats left and attached to bumper. Looks like a bumper now with now hitch. Now question, now that factory hitch is removed. Does the Curt custom hitch still fit & Clear everything/bumper below? ? Want to put hitch back on.

William P.

12/20/2020

@ChrisR Just wrote about the factory hitch removal. I can send pictures what it looks like now with bumper reattached with center of hitch cut out so bumper could be reattached if you want. Just don’t want to order the curt custom hitch if not going to fit. Thanks

See All (4) Replies to Jerry S. ∨

Answer 1

The Curt Trailer Hitch Receiver - Custom Fit - Class IV, #C14357, can fit the 2004 Ford F-150 truck if that has never had a factory installed hitch. The factory hitch uses part of the bumper structure and if removed aftermarket hitches will not be…

view full answer...

Answer 2

We can get your 2005 Ford F-150 with a 4-way set up with a trailer hitch receiver and brake controller so you can tow your trailer. Since your truck does not have a factory hitch, and you need to tow a heavy 7,000 lb trailer, the hitch that will fit…

view full answer...

Answer 3

According to Ford, a 2005 Ford F-150 SuperCab with four-wheel drive and a 5.4L V8 will have a capacity between 7,300 lbs and 9,300 lbs depending on what wheelbase it has and what axle ratio it has. I recommend finding what yours is and looking in…

view full answer...

Answer 4

The factory hitches are often welded on, so you would need to have the hitch cut off if that is the case to have a replacement. All of the aftermarket hitches from all our manufacturers say will not work with factory mounted hitch, so a hitch like…

view full answer...

Answer 5

Yes, Curt trailer hitch #C14357 will fit the 2004 Ford F-150 new body style. The recommended ball mount for this hitch is #C45341. It takes a ball with a 1-1/4 inch diameter shank. And if your truck did not come with a trailer connector you can use…

view full answer...

Answer 6

The factory hitch on your vehicle is integrated into the factory bumper mounting brackets, so removing the OEM hitch will result in losing your bumper. My contact at Curt tells me that he also had an early 2000's F-150, and he ended up having to…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Fit & Compatibility of Aftermarket Trailer Hitch #C14357 on 2004 Ford F-150 w/Factory Trailer Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching