Trailer Hitch and Wiring for a 2004 Ford F-150 New Body Style

Question

Question:

will th is hitch fit F 150 2004 new body styl

asked by: William D

0

Expert Reply:

Yes, Curt trailer hitch # C14357 will fit the 2004 Ford F-150 new body style. The recommended ball mount for this hitch is # C45341. It takes a ball with a 1-1/4 inch diameter shank.

And if your truck did not come with a trailer connector you can use # C55551 to add a 4-Way flat to the rear of the vehicle.

expert reply by: Michael H

0

Answer 1

I spoke to my contact at Curt and he informed me that the Curt Class V Trailer Hitch #C14357 would indeed fit for a 2004 Ford F-150 excluding the Heritage Edition if the factory hitch was removed as long as no portion of the frame or bumper beam is…

view full answer...

Answer 2

The factory hitch on your vehicle is integrated into the factory bumper mounting brackets, so removing the OEM hitch will result in losing your bumper. My contact at Curt tells me that he also had an early 2000's F-150, and he ended up having to…

view full answer...

Answer 3

According to Ford, a 2005 Ford F-150 SuperCab with four-wheel drive and a 5.4L V8 will have a capacity between 7,300 lbs and 9,300 lbs depending on what wheelbase it has and what axle ratio it has. I recommend finding what yours is and looking in…

view full answer...

Answer 4

We can get your 2005 Ford F-150 with a 4-way set up with a trailer hitch receiver and brake controller so you can tow your trailer. Since your truck does not have a factory hitch, and you need to tow a heavy 7,000 lb trailer, the hitch that will fit…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver - Custom Fit - Class IV, #C14357, can fit the 2004 Ford F-150 truck if that has never had a factory installed hitch. The factory hitch uses part of the bumper structure and if removed aftermarket hitches will not be…

view full answer...

Answer 6

The factory hitches are often welded on, so you would need to have the hitch cut off if that is the case to have a replacement. All of the aftermarket hitches from all our manufacturers say will not work with factory mounted hitch, so a hitch like…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Trailer Hitch and Wiring for a 2004 Ford F-150 New Body Style

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching