Adding Trailer Brakes To Popup Trailer with Dexter 3,500 lb Axles
Published 07/27/2016
Products Featured in This Question
Question:
I am looking to add electric drum brakes to a popup I just purchased since I will be towing it with a Subaru Forester. The previous owner had a Dexter axle w/ EZ Lube and the over under kit. He also upgraded to 10inch wheels. I havent been able to pull the tire off and measure the spindle but I took some measurements and found a sticker with the part number for the axle. I am wondering which brakes will fit? It looks like I only have two options based on the tire size but I want to make sure the brakes will fit on the mounting flange it doesnt look like the standard square one but the hole spacing seems about the same and over the spindle. The sticker says it is a 3,500lb axle and the part number on the axle is 404712 T35B UL FL 63.25/0/55.625 BM FC. I have attached a picture of the mounting flange and the sticker. Thanks.
asked by: Michael B
Expert Reply:
Since we know it is a 3,500 lb Dexter axle I can tell you exactly which hub/drums and assemblies would fit it. That being said you will have to upgrade your wheels to a larger size as the hubs that fit your spindle are 10 inch in diameter and would require you to go with a 14 inch diameter wheel. Since your trailer was already lifted with an Over Under kit you SHOULD have the fender clearance for this. But you would need to verify.
For a hub to fit you would want the part # AKHD-545-35-EZ-K which is a EZ lube hub/drum with a 5 on 4-1/2 inch bolt pattern. For brake assemblies you would want the part # AKEBRK-35R-SA for the right hand side and part # AKEBRK-35L-SA for the left hand side.
For a wheel and tire to fit that hub you would want the part # AM10235 for the tire, which has an overall diameter of 26.3 inches. Then you need a wheel, # AM32161. These are not mounted so you will need to get them mounted at a local shop.
Product Page this Question was Asked From
Electric Trailer Brake Assembly - 7" - Right Hand - 2,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 2000 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Feature Review Electric Trailer Brake Assembly
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Wiring
- Q&A: Replacing 6-Pin Square Trailer Connector on Jayco Pop-Up Camper With a 4-Way Flat
- Shop: TowSmart Plug-In Trailer Connector Adapter - 4-Way Flat to 7-Blade
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Shop: etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector
- Shop: Curt Echo Under-Dash Bluetooth Brake Controller w/ Plug-In Harness - Up to 4 Axles - Proportional
- Q&A: Why Are Dexter Drums 8-271-7UC3-EZ and 8-257-5UC3 So Different In Price?
- Q&A: Brakes Needed for an Older Jayco Pop Up Turned Tear Camper
- Q&A: Adding Electric Trailer Brakes to 2009 Jayco Jay Series
- Q&A: Parts Needed to add Electric Trailer Brakes to 1990 Skamper 190c
- Q&A: Replacement 7 inch Brake Assembly for Fiat Elnagh 320 Motorhome
- Q&A: Is Dexter Trailer Brake Set part # 23-47-48 part Number 23-47 and 23-48
- Shop: Replacement Race for L44643 and L44649 Bearings
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44649 - Pre-Greased