Will Timbren Suspension Enhancement System TGMRC55 Fit 2008 Chevrolet Kodiak 5500 Motor Home

Question

Question:

Will these fit my 2008 Chevy 5500 Kodiak 36foot motorhome?

asked by: Kerry G

0

Expert Reply:

The Timbren Rear Suspension Enhancement System # TGMRC55 that you referenced have been confirmed to fit the 2008 Chevrolet Kodiak 5500.

These jounce-style suspension enhancement springs will help provide a level ride for your RV if the rear of the motor home is sagging under a heavy weight load. No drilling is required to install the springs, and I have attached the installation instructions for you.

If you are looking to improve the ride quality of your RV, another component I recommend is the Roadmaster Rear Anti-Sway Bar for Motor Homes # RM-1109-157. This anti-sway bar is confirmed to fit the 2008 Kodiak 5500 both with or without the Granning Air Ride. An anti-sway bar will help minimize sway and driver fatigue by working to improve the stability and drivability of the RV. The installation instructions for the # RM-1109-157 are also linked for you.

I have attached a help article on Timbren suspension enhancement as well as stability control for heavy-duty vehicles for you.

expert reply by: Victoria B

0

Answer 1

I checked with SuperSprings and their part #SSA17 has been confirmed as a fit for a 2007 Chevrolet Kodiak 5500 like what you have so it would work well for you. This is recommended for vehicles with very high payloads though as it provides you with a…

view full answer...

Answer 2

The SuperSprings Custom Suspension Stabilizer and Sway Control Kit will install above the leaf springs but below the brackets used to engage the overload springs - I believe that's what you mean by the bracing setup. We have a sample installation…

view full answer...

Answer 3

Although they are for the front axle, the SumoSprings #SSF-281-47 are confirmed to fit your 2008 Kodiak C5500 Motorhome. Unfortunately, for the rear axle the only comparable option is the Timbren Rear Suspension Enhancement System #TGMRC55. There is…

view full answer...

Answer 4

Hey Richard, The Voyager AOM561 has been discontinued so you'd be looking at replacing both the camera and monitor because they made their different camera generations incompatible with each other. With you wanting to stick with your current…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Will Timbren Suspension Enhancement System TGMRC55 Fit 2008 Chevrolet Kodiak 5500 Motor Home

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching