
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When heavy trailers or bed loads make the rear sag, the Timbren Rear Suspension Enhancement System adds up to 15,000 lbs of support to keep things level. The hollow rubber springs sit above the rear axle and work with your factory suspension for better handling, traction, and braking. By keeping your ride height even, you maintain steering control and headlight alignment even with a full load or trailer attached.

Rough roads and heavy loads don’t have to mean a rough ride. These hollow rubber springs act as shock absorbers that take the edge off bumps and dips while extending the life of your factory suspension. The rubber design cushions light loads but gets more rigid as weight increases, so it stays comfortable when empty and firm when loaded.


Each spring works on its own to support either side of the vehicle. When you make a sharp turn or hit an off-center load, this independent action reduces body roll and sway so you stay steady through corners, wind gusts, or trailer movement. By keeping both sides balanced, it helps the trailer track better and makes towing feel more controlled.


The setup installs directly onto the frame with custom brackets and hardware included—no drilling required. The springs hang about 1 inch above the axle so your factory suspension operates normally when unloaded. Once in place, there are no airlines, compressors, or pressure adjustments to worry about—just straightforward load support that’s ready every time you haul or tow.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com, and today we're gonna take a look at this Timbren Rear Axle Suspension Enhancement System. Now, this is a custom fit part that is designed to fit the 1997 to 2010 a Isuzu F-Series FRR, FTR and FVR. And then the 2003 to 2009 Chevrolet Kodiak 4500, 5500, 6500, excluding Low Pro and 7500. And then the 1991 to 2002 Chevrolet Kodiak Low Pro, and excluding Low Pro. Then the 1997 to 2009 GMC T-Series, T5500, T6500, T7500 and T8500.
Then the 2003 to 2009 GMC TopKick 4500, 5500, 6500, excluding Low Pro and 7500. And finally, the 1991 to 2002 GMC TopKick Low Pro, and excluding Low Pro. These hollow rubber springs with a 15,000 pound capacity are going to sit above your rear axle to help stabilize and level your vehicle, and they're going to improve your suspension, handling and safety. Now, as you can see, I do have these springs kind of loosely installed here on these brackets, and these springs are going to provide additional support for you as needed. So you always have a smooth, comfortable ride, allowing the leaf springing ample movement while cushioning light loads.
They're going to ride just as smoothly when you're not hauling a load. They become more rigid as more weight is added for great performance when you're hauling a heavy load, increasing stability and reducing vehicle sag. They're gonna work independently, adjusting side to side, helping compensate for off-sensor loads and reducing body roll when swerving and turning corners. These springs also act as shock absorbers, taking the brunt of bumps and rough roads and extending the life of your vehicle suspension. So this kit includes everything that you see here on my table before me.
You're going to receive these two hollow rubber springs, and then these vehicle specific brackets, and then the hardware for a simple installation, instructions are also included to walk you through that installation. And what's great about these is there's no drilling required and they're going to install directly onto your frame. Again, the capacity is 15,000 pounds, but it is important to note that these Tumbren springs will not increase your vehicle's weight carrying capacity. So you wanna make sure that you're not exceeding the manufacturer's recommended weight limit. and Timbren does give these a lifetime warranty.
Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews

Jay S.
8/14/2026
Now that its been a year Im very impressed with them. Theres no ride detriment without the 5th wheel attached and they do a great job of mitigating squat

Kate F.
5/6/2026
Glad to hear the Timbren systems worked out so well for your RAM Van Mitchell! It’s great that you noticed the smoother, more progressive response compared to the factory bump stops, especially under load. Thanks for sharing your experience with both the front and rear installs, that’s really helpful for others considering the upgrade. What kind of loads are you usually hauling with your van?

Brooke M.
5/7/2025
Wow, thank you for sticking with us, Don! That is awesome. I think you made an excellent choice here. Timbrens are tough and the heavy duty are SUPER tough. Glad to hear these were a good fit. Love the photos! Is that your own property?

Don
5/21/2026
The TIMBRENs work as stated during when I am pulling anything heavy. However, when the truck is not pulling anything, anyone riding in the rear seat gets a very hard jarring jolt when driving over any roadway repairs, bumps, expansion joints on bridges. I wished that I would have went with the Super Springs, or the Road Active Suspension. I may replace the TIMBRENS later.


Lazer S.
6/16/2026
They definitely look like they are helping, Orlando! How are they when you aren't towing? We hear a lot of people say they can be pretty harsh when unloaded.

Robin H.
9/22/2026
Thanks for taking the time to share such a detailed review and all of the pictures! The unloaded ride is a concern we hear fairly often with SES upgrades, so your experience with the 1" gap and rough-road testing will be really helpful to others considering these for their F-250. We appreciate the kind words about Naomi and our team as well. Looking forward to your update once you get some miles on them with the Rockwood!

Heather A.
4/24/2026
Hi there, thanks for reaching out, that’s actually a common issue with this type of trim. The one you tried is a standard flat insert, but some RVs (like your NOBO) use a slightly domed trim to help it sit over the screw heads in the track. If the screws stick up even a little, a flat trim won’t fully snap in place, which sounds like what you’re running into. The best way to find the right replacement is to remove a small piece of your original trim, lay it flat, and measure the full width from edge to edge. Most are either 3/4" or 1", but the shape matters too, not just the width. If yours has that domed profile, you’ll want something similar or a softer vinyl that can flex over the screws. If you’re able to send a quick photo of your track or old trim, I’d be happy to help you find a better match.

Mike L.
4/23/2026
Niiiice, I see what you did there!! That looks like a sweet setup!


Mike L.
4/2/2026
Glad to hear they worked well for you Jerrod. Hope you had a good trip!

Mike L.
2/26/2026
Thank you Darrell, we're glad to hear your Timbrens are still on the job!

Kate F.
4/23/2026
Thanks for sharing your experience Thomas. It is great to hear the Timbrens made a noticeable difference in ride quality and reduced body roll on your E350 Class C. We also appreciate the heads-up on the install. That kind of real-world feedback about brake line clearance is very helpful for others working on a similar setup. Would be nice if they had a stronger option, if you need the 5K, might need to go to airbags, but who wants to deal with having to air up if you don't need to. Where are you off to on the next adventure?

Kate F.
5/6/2026
Glad we had the right suspension upgrade to help with the squat Dennis! How is the ride when you are unloaded?

Christopher H.
8/14/2026
Love hearing this! Really appreciate the detailed feedback and photos. That extra stability when you're loaded up can make a huge difference. And installing them at 11 at night—that's commitment. Hope they treat you just as well on those mountain roads. Safe travels and we'll definitely make sure Dee Dee gets the shoutout.


Heather A.
2/21/2025
Timbrens are the best for sag because they are made of dense rubber. 6500 lbs sounds like one heck of a travel trailer, what is it? Any fun plans this summer?


Jerome
3/2/2026
Awesome product. Would recommend.

Lazer S.
8/19/2026
Glad to hear they are working well for you, Ryan! Now that they are on, where you headed?

Christopher H.
9/3/2026
Happy to hear the Timbrens are making that big of a difference Tony. Thanks for including the photo and we appreciate the kind words! Have you taken any longer trips with the Timbrens installed?


Jesse M.
9/10/2026
Awesome! Glad to hear the Timbrens made such a big difference in the ride quality. Thanks for sharing! Happy travels!

Mike L.
4/2/2026
Thanks for the photo, Sid. Quite a bit of difference there!!
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.









Kate F.
6/5/2026
Thanks for your review! It's great to hear these made such a noticeable difference in the handling of your C7500. Reducing body roll and improving ride quality, especially when loaded, can make a big difference in driver confidence. I'm glad the installation went smoothly overall, even if removing the old bracket rivet was a bit of a challenge. Thanks for sharing your experience!