Will the SuperSprings # SSA17 Fit a 2007 Chevy Kodiak 5500

Question

Question:

Have motorhome on kodiak 5500 chassis. Another website said SSA17 are not correct. Just want to make sure they are correct and all mounting hardware is included.

asked by: Ken

0

Expert Reply:

I checked with SuperSprings and their part # SSA17 has been confirmed as a fit for a 2007 Chevrolet Kodiak 5500 like what you have so it would work well for you.

This is recommended for vehicles with very high payloads though as it provides you with a total of 6,000 lbs of total suspension support.

expert reply by: Jameson C

0

Answer 1

The Timbren Rear Suspension Enhancement System #TGMRC55 that you referenced have been confirmed to fit the 2008 Chevrolet Kodiak 5500. These jounce-style suspension enhancement springs will help provide a level ride for your RV if the rear of the…

view full answer...

Answer 2

Hey Ryan! The SuperSprings Custom Suspension Stabilizer and Sway-Control Kit #SSA24 will fit your 2023 Ram 3500. It is compatible with SRW and DRW trucks so it doesn't matter either way. It is also compatible on models with and without factory…

view full answer...

Answer 3

Hey, Esteban! That's a really good question. I reached out to SuperSprings to make sure what will work for you. They confirmed that the kit that you will want to use on you 2006 Chevy Silverado 3500 Dually Flatbed is part #SSA23.

view full answer...

Answer 4

I recommend the SuperSprings Helper Spring #SSA24 for your 2024 Chevrolet Silverado 3500HD dually. These springs are adjustable which allow you to dial in how quickly they will engage under load.

view full answer...

Answer 5

We have the TorkLift Camper Tie-Downs Front #TLD2142 and Rear #TLD3112 for your 2023 Ram 3500 Crew Cab long bed dually with the factory running boards. You may need the Anchor Relocation Kit #TLA7004 if your slide in camper is less than 90" from…

view full answer...

Answer 6

The factory hitch on your vehicle is integrated into the factory bumper mounting brackets, so removing the OEM hitch will result in losing your bumper. My contact at Curt tells me that he also had an early 2000's F-150, and he ended up having to…

view full answer...

Answer 7

Hey Mark thanks for stopping by! Yes, the Voyager WiSight 2.0 Wireless RV Backup Camera System #ASA84YR can be used as an observation system to help you see behind your trailer while driving forward. This system supports up to 4 cameras, includes a…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Will the SuperSprings # SSA17 Fit a 2007 Chevy Kodiak 5500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching