Can Dexter 8-213-5UC1 Hub Replace Dexter 8-133 Hub

Question

Question:

I have an axle with dexter 8-133 hubs on it now and would like to change to an idler hub such as Code: 8-213-5UC1 Would this idler hub work or totally different. Thanks

asked by: David J

0

Expert Reply:

I spoke with my contact at Dexter to find the bearing and seal information on the 8-133 hub. She confirmed that the 8-133 hub uses inner bearing # 25580 and outer bearing # LM67048 with the 10-1 # GS-2125DL grease seal. These match with the hub you referenced # 8-213-5UC1. The Dexter Trailer Hub Assembly # 8-213-5UC1 will work well for you.

expert reply by: Victoria B

0

Answer 1

The Dexter 8-133 axle according to my contact at Dexter is an old motorhome axle they no longer make. Their tech said the motorhome axles like what you have are designed for one time use so there are not compatible parts made for even replacement…

view full answer...

Answer 2

No, that is not completely true. The wet bolts can be re-used as long as they are not rusted, cracked or damaged in any other way, to include the splines or threads being damaged. The main thing that you'd want to replace is the lock-nut which…

view full answer...

Answer 3

You will need to get the other bearing number from inside your current hubs before we can pick you out replacement hubs. Most likely the outer bearing you pulled is a LM67048 and the inner you have is a 25580 which would mean that the #8-201-5UC3…

view full answer...

Answer 4

Hey Brian, I did some research on your Dexter 8-222 Hub and was able to find the inner and outer bearing numbers as well as the grease seal used. It looks like this particular hub was designed for mobile homes and these, for the most part, have more…

view full answer...

Answer 5

The Dexter 8-222 model hubs currently on your trailer are designed primarily for mobile home use, and these types of hubs typically use unique bearing combinations that make it really difficult to find full replacement assemblies. Mobile home parts…

view full answer...

Answer 6

The best option I have for you would be to obtain two new axles, the Dexter Trailer Axle w/ Electric Brakes part #8327826-EB which come with everything that you need but will require a wheel with 6 on 5-1/2" bolt pattern. I have attached a list…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Can Dexter 8-213-5UC1 Hub Replace Dexter 8-133 Hub

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching