Pin to Secure B&W # BWTEXA4200 Extend-A-Goose Coupler

Question

Question:

Im not sure that my Wilson trailer has the adjustment holes on the outer tube. Just two bolts threaded into the tube. What pin should I use if I want to drill some holes? Thx

asked by: Pete

0

Expert Reply:

According to B&W, the Extend-A-Goose Gooseneck Coupler adjustment holes are 7/8 inch in diameter. I'd recommend using the Draw-Tite # 58388 as a through pin. The pin is 6 inches long by 3/4 inches in diameter.

expert reply by: Mike L

0

Answer 1

The pin holes in the B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200 are 3/4" in diameter for a 3/4" Pin #BD0233060301. The 8 holes are spaced 1" on center vertically for 8" range adjustment.

view full answer...

Answer 2

I wish we had something that matched what you need but none of the offset gooseneck couplers we offer have forward facing mounting holes. They all have holes that go from the sides. For a cushioned coupler setup with a 5 inch offset that comes with…

view full answer...

Answer 3

Normally drilling is not required when installing the B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200. Typically this has the correct hole size and location for most trailer applications. But if you need to drill your trailer to give you the…

view full answer...

Answer 4

I called my contact at B&W about the Extend-A-Goose Gooseneck Coupler, part #BWTEXA4200. They told me that the offset holes are so that the adapter can accommodate couplers that have the pin in different locations, and will not affect the towing…

view full answer...

Answer 5

The only offset gooseneck coupler we offer is the B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200 that has a 24k capacity. The only couplers we offer with a 30k capacity would be one like the Bulldog Coupler part #BD0289500300.

view full answer...

Answer 6

The Bulldog coupler part #BD44150WH301 is a really great choice for your Featherlite trailer. It'll be very reliable and easy to use so you'll really like it. Then for an a-frame jack we have the zinc coated etrailer A-Frame Round Jack…

view full answer...

Answer 7

The gooseneck hitch I recommend for your 2012 F-150 is the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1104. This includes a custom installation kit and when the ball is removed or dropped into the hole gives you complete bed access.…

view full answer...

Answer 8

Hey Mike, the B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200 is going to require a pin hole in the outer tube of your coupler like you mentioned. Could you drill a hole through your current coupler?

view full answer...

Answer 9

I prefer the B&W Extend-A-Goose Gooseneck Coupler, #BWTEXA4200. If you attach this inner tube to your gooseneck trailer you will get an extra 10" of clearance between your truck cab and trailer. This fits the standard 4" inner diameter…

view full answer...

Answer 10

Hey Zachary, What kind of specs are you needing for the Replacement Return Spring for etrailer and Ram Square, Direct Weld Jacks #TJD-12000-RSP? It's designed to work with 10k rated etrailer and Ram square jacks. While retracted the spring is…

view full answer...

Answer 11

In order to center up the B&W Extend-A-Goose Gooseneck Coupler part #BWTEXA4200 you can measure from the same point on both sides of your trailer to the center front edge of the coupler. When both of these measurements are the same you have the…

view full answer...

Answer 12

I have a solution for you but the Curt 4" Offset Ball for Double-Lock Gooseneck Hitch item #C602 will not work with the Ecotric ET-062 hitch system. The Curt offset ball only fits Curt Double-Lock gooseneck hitches. The other offset balls we…

view full answer...

Pin to Secure B&W # BWTEXA4200 Extend-A-Goose Coupler

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching