Pin Hole Dimensions In B&W Extend-A-Goose Gooseneck Coupler # BWTEXA4200

Question

Question:

My two set bolts are on the back of the coupling. Doni srill 2 new goes 9n the side of the coupling same height and align with the hitch. What size are the hole diameters exactly in the hitch?

asked by: Ryan

0

Expert Reply:

The pin holes in the B&W Extend-A-Goose Gooseneck Coupler # BWTEXA4200 are 3/4" in diameter for a 3/4" Pin # BD0233060301. The 8 holes are spaced 1" on center vertically for 8" range adjustment.

expert reply by: Bud M

0

Locking Pin Holes For B&W Extend-A-Gooseneck Coupler # BWTEXA4200
(click to enlarge)

Answer 1

Yourr trailer's coupler uses set screws to hold the tube in place instead of a cross pin. In this case you'll still use the set screws in the same fashion they're being used to install the Extend-A-Goose #BWTEXA4200 and you won't use…

view full answer...

Answer 2

I called my contact at B&W about the Extend-A-Goose Gooseneck Coupler, part #BWTEXA4200. They told me that the offset holes are so that the adapter can accommodate couplers that have the pin in different locations, and will not affect the towing…

view full answer...

Answer 3

As the B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200 is a universal coupler, it has to be able to work with different trailers. This means the adjustment holes are offset a little and can cause the coupler to sit a little crooked once…

view full answer...

Answer 4

I spoke to my contact at Bulldog and he informed me that the length of the pin is 7 inches overall and has a usable length of 5-1/2 inches depending on how the ring is setting. Diameter is 3/4 inches.

view full answer...

Answer 5

The B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200 is a great solution for your application. The torque setting that B&W calls out for the set bolt can be found in the instructions (which I'm linking to this page). We try to avoid…

view full answer...

Answer 6

The gooseneck hitch I recommend for your 2012 F-150 is the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1104. This includes a custom installation kit and when the ball is removed or dropped into the hole gives you complete bed access.…

view full answer...

Answer 7

Hey Fred, The B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200 has mounting holes on the sides of it as opposed to the front and back. You'll want to secure this with a "side to side" pin and then you can use a set screw on your…

view full answer...

Answer 8

Normally drilling is not required when installing the B&W Extend-A-Goose Gooseneck Coupler #BWTEXA4200. Typically this has the correct hole size and location for most trailer applications. But if you need to drill your trailer to give you the…

view full answer...

Answer 9

In order to center up the B&W Extend-A-Goose Gooseneck Coupler part #BWTEXA4200 you can measure from the same point on both sides of your trailer to the center front edge of the coupler. When both of these measurements are the same you have the…

view full answer...

Answer 10

I spoke with my contact at B and W and was told that the Extend a Goose #BWTEXA4200 and the 4 inch offset ball #BWGNXA4085 can be used together. However, the pivot point of the trailer will still only be 4 inches back from its original position…

view full answer...

Answer 11

Hey Zachary, What kind of specs are you needing for the Replacement Return Spring for etrailer and Ram Square, Direct Weld Jacks #TJD-12000-RSP? It's designed to work with 10k rated etrailer and Ram square jacks. While retracted the spring is…

view full answer...

Answer 12

I prefer the B&W Extend-A-Goose Gooseneck Coupler, #BWTEXA4200. If you attach this inner tube to your gooseneck trailer you will get an extra 10" of clearance between your truck cab and trailer. This fits the standard 4" inner diameter…

view full answer...

Pin Hole Dimensions In B&W Extend-A-Goose Gooseneck Coupler # BWTEXA4200

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching